--- title: "Adjust Tray Height" slug: "1refund-creditcard-12" updated: 2026-05-25T07:52:49Z published: 2026-05-25T07:52:49Z canonical: "support.kiosoft.com/1refund-creditcard-12" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Adjust Tray Height ## 1. ### **Move out the tray** | 1) Pull up the tray fixing buckle. | 2) Hold up the front end of the tray, then pull out the tray. | 3) Cut the ribbon fastening the cable at the back side of the tray. | | --- | --- | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/1refund-creditcard-image-y53wz13r.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A54Z&se=2026-11-18T21%3A31%3A54Z&sr=b&sp=r&sig=QUVkerkW%2F%2FApXYe0nEe8sayfHX2jRwVJNXYcH51Qmp0%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/1refund-creditcard-image-jnnu4zv7.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A54Z&se=2026-11-18T21%3A31%3A54Z&sr=b&sp=r&sig=5GvDX6Ow%2FLufkw%2Fx1NpU39h9FN2D15hwgteE9%2B50jkI%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/1refund-creditcard-image-58xrhgxs.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A54Z&se=2026-11-18T21%3A31%3A54Z&sr=b&sp=r&sig=J0JnlPqsBwg2sPGgga%2BwOp5wTJUyNYeVxZ8hpTdvSuw%3D) | | 4) Unplug the tray cable connector. | 5) Take out the tray. | | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/1refund-creditcard-image-w8vtv8nx.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A54Z&se=2026-11-18T21%3A31%3A54Z&sr=b&sp=r&sig=00bXHWS2Q4WYQlK6FJTdlWMzi9MJiy7Mir4zRUoOQg8%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/1refund-creditcard-image-7xzj378x.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A54Z&se=2026-11-18T21%3A31%3A54Z&sr=b&sp=r&sig=o2IOxyxvUw40Kch6lg9TTecWd7mibASE0r4w2zMOtSY%3D) | | 1. ### **Adjust the height of the slide rails** | 1) Remove the screws of the tray slide rail at both sides. | 2) Unhook the slide rails from the holding holes. | **Note:** The distance between two contiguous holding holes is 2cm. | | --- | --- | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/1refund-creditcard-image-jlxa8x24.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A54Z&se=2026-11-18T21%3A31%3A54Z&sr=b&sp=r&sig=Y9XY%2BbJslbhTO0R5JIRIk3JQXBviGOXF4DT1w8nr23Y%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/1refund-creditcard-image-7hkxeliu.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A54Z&se=2026-11-18T21%3A31%3A54Z&sr=b&sp=r&sig=weiKOGuxSihwruAjXhi0k4EukvQ4hTkhTkH7aUfDa%2BY%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/1refund-creditcard-image-klxty2q0.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A54Z&se=2026-11-18T21%3A31%3A54Z&sr=b&sp=r&sig=AZ1gwM4X4rRyeI1u3V6YGMum%2FacfLrVuSgdE9VEliNA%3D) | | 3) Adjust the slide rails to the proper height and fasten with screws. | 4) Install back the tray. | **Note:** The height of the slide rails at the two sides should be the same. |