Press the “Test slot” button to show the slot test page. This section only tests the slot dispensing motion, which means the spiral of the tested slot will rotate a full circle. (Take spiral slot as an instance.)
Test single slot: Press the single slot tab, and the test will be activated. You will see test status and results indications on the screen.
Test batch slots: Press "Batch test" button to switch to the batch test page.
Test multiple slots -- select multiple slots, then press “Batch test” button. (Slots locating at different trays are selectable.) The slots will perform test in order.
Test the entire tray – press “Test the entire tray” button.
Test the entire machine -- press "Test the entire machine" button.
Note: If an error code shows up during testing, click the “clear error” button to remove it. If it reappears, please inspect the machine.
Cargo Lane Collaboration:
When you click this button, all springs of the machine will reset to the initial position.
When test slot in TSD54E, there will be prompt as above. Based on actual test result, when test slot dispensing feature when slot is empty, photoelectric detection board at elevator won’t detect item drop from slot, then machine will prompt error 80. Need to clear the error if want to test the slot again.
|
|
