--- title: "2. Peripherals Installation" slug: "2-peripherals-installation" updated: 2026-08-07T09:08:41Z published: 2026-08-07T09:08:41Z canonical: "support.kiosoft.com/2-peripherals-installation" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # 2. Peripherals Installation ### 2.1 Install Bill Acceptor | 1) Find the installation position of bill acceptor. | 2) Remove the cover plate at the back of sidecar by using nut driver. | 3) Prepare bill acceptor, 4 nuts(M4), nut driver and bill acceptor mounting plate. | | --- | --- | --- | | ![Front exterior of vending machine showing the bill acceptor installation position highlighted with a red rectangle on the side panel](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/2.-peripherals-installation_page_0042_img_02.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A07%3A40Z&se=2026-11-18T21%3A07%3A40Z&sr=b&sp=r&sig=h54i%2FsGUgkDSSaK%2BPmtHR3WOmmQ9OuPgMEG4t6IKbe8%3D) | ![Interior view of sidecar rear showing mounting plate area with four mounting holes outlined in red](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/2.-peripherals-installation_page_0042_img_02.png_page_0042_img_03.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A07%3A40Z&se=2026-11-18T21%3A07%3A40Z&sr=b&sp=r&sig=Et%2F6dLuOOakk0WQ1%2FiPnIi5dGTm9ojlpb4HS31Fvo08%3D) | ![Bill acceptor unit and mounting bracket laid out on a wooden surface with four M4 nuts, a nut driver and a small square mounting plate](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/2.-peripherals-installation_page_0042_img_02.png_page_0042_img_03.png_page_0042_img_04.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A07%3A40Z&se=2026-11-18T21%3A07%3A40Z&sr=b&sp=r&sig=9VyCHI88oBoqQJsPL%2BFaDdqPvmynm9Xqeffsh8X6jM4%3D) | | 4. Tighten 4 nuts to attach the bill acceptor on its mounting plate. | 5) Place the bill acceptor into mounting hole. | 6) Prepare 4 nuts(M4) and nut driver. | | ![Close-up of a screwdriver tightening a nut on the bill acceptor mounting plate](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/2.-peripherals-installation_page_0042_img_02.png_page_0042_img_03.png_page_0042_img_04.png_page_0042_img_05.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A07%3A40Z&se=2026-11-18T21%3A07%3A40Z&sr=b&sp=r&sig=8q7eFWB5%2F8Cf5bl1SijzYZZrrWVnckAYxJc0w3TrOeg%3D) | ![Bill acceptor partially inserted into the machine mounting hole viewed from the front of the machine](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/2.-peripherals-installation_page_0042_img_02.png_page_0042_img_03.png_page_0042_img_04.png_page_0042_img_05.png_page_0042_img_06.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A07%3A40Z&se=2026-11-18T21%3A07%3A40Z&sr=b&sp=r&sig=j22jeAux1NV%2BnO8xKhgMnbq5V%2FidP1CGJvo2hCFq3Ho%3D) | ![Top-down photo of a long screwdriver and four M4 nuts arranged on a wooden tabletop](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/2.-peripherals-installation_page_0042_img_02.png_page_0042_img_03.png_page_0042_img_04.png_page_0042_img_05.png_page_0042_img_06.png_page_0042_img_07.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A07%3A40Z&se=2026-11-18T21%3A07%3A40Z&sr=b&sp=r&sig=JORXAxXRG5%2B%2FlUd1Y40Uny0dqnyTRZLRcsqi3oQMx4Y%3D) | | 7) Tighten 4 nuts to attach the bill acceptor on the machine. | 8) Connect the MDB cable to the machine. | | | ![Bill acceptor mounted on machine with a screwdriver tightening the final nut at the side of the unit](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/2.-peripherals-installation_page_0042_img_02.png_page_0042_img_03.png_page_0042_img_04.png_page_0042_img_05.png_page_0042_img_06.png_page_0042_img_07.png_page_0042_img_08.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A07%3A40Z&se=2026-11-18T21%3A07%3A40Z&sr=b&sp=r&sig=DkuNoiL%2BWv9RdIVTd70NmrckyWq3kxcE00gvNvGinL4%3D) | ![Technician connecting a multi-wire MDB cable to the bill acceptor wiring connector inside the machine](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/2.-peripherals-installation_page_0042_img_02.png_page_0042_img_03.png_page_0042_img_04.png_page_0042_img_05.png_page_0042_img_06.png_page_0042_img_07.png_page_0042_img_08.png_page_0042_img_09.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A07%3A40Z&se=2026-11-18T21%3A07%3A40Z&sr=b&sp=r&sig=r7uZ3eyX4K96vpI8gR21C1x4n1dg%2F4D39bnNHmsboWo%3D) | |