--- title: "Adjust Spiral End Position" slug: "4-4-1-adjust-spiral-end-position" updated: 2026-10-10T01:27:53Z published: 2026-10-10T01:27:53Z canonical: "support.kiosoft.com/4-4-1-adjust-spiral-end-position" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Adjust Spiral End Position | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-60CPQXYA.png?sv=2026-02-06&spr=https&st=2026-11-18T22%3A05%3A52Z&se=2026-11-18T23%3A05%3A52Z&sr=b&sp=r&sig=ftndpwOyfiNS7FwhjIP4Nt1QbhVW9xqqTlr150B2Bo4%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-WXZKSAZJ.png?sv=2026-02-06&spr=https&st=2026-11-18T22%3A05%3A52Z&se=2026-11-18T23%3A05%3A52Z&sr=b&sp=r&sig=ip9tf5Vr6zFueJiNTSLqEtUDIMfEhH3Are3pEuP9Css%3D) | ![Two close-up comparison photos of spiral: top showing spiral in default position, bottom showing spiral pulled out](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/4.4.1-adjust-spiral-end-position_page_0009_img_05.png_page_0009_img_04.png_page_0009_img_03.png?sv=2026-02-06&spr=https&st=2026-11-18T22%3A05%3A52Z&se=2026-11-18T23%3A05%3A52Z&sr=b&sp=r&sig=7v369W9PsBblM8HTSCP8rl1ODo55YKUcBavWytkV0c0%3D) ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-DXP3E4KZ.png?sv=2026-02-06&spr=https&st=2026-11-18T22%3A05%3A52Z&se=2026-11-18T23%3A05%3A52Z&sr=b&sp=r&sig=UAIkU7KTpM9H1PKaGS2pRe33GDMKCBklq0pcSvyqHKE%3D) | | --- | --- | --- | | Hold the end of the spiral and pull out the spiral vertically. (can feel the elasticity at the backside.) | Rotate the spiral to the desired position. Release the spiral. | Comparison of spiral in default position and pull-out position |