Replace Spiral

Prev Next

Vertical photo showing hand holding spiral end near the opening

Sequence of three photos showing spiral rotated on the white hub with red rotation arrows and a highlighted short head

Close-up of spiral short head aligned to opening with red rectangles highlighting contact points

Wider view of vending mechanism showing left-rotated and right-rotated spiral plugs on connectors

Hold the spiral end and rotate it towards the opening with certain strength.

With a clear click sound, the short head of the spiral will drop to the opening area and allow to pull out the spiral.

When replacing new spiral, hook its 1st ring and align its short head to the opening, then rotate spiral to secure.

Left-rotated spiral plug on the 2nd connector
Right-rotated spiral plug on the 3rd connector