--- title: "Adjust Tray Height" slug: "adjust-tray-height" updated: 2025-02-12T23:12:36Z published: 2025-02-12T23:12:36Z canonical: "support.kiosoft.com/adjust-tray-height" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Adjust Tray Height #### **Move out the tray** | 1) Pull up the tray fixing buckle. | 2) Hold up the front end of the tray, then pull out the tray. | 3) Cut the ribbon fastening the cable at the back side of the tray. | | --- | --- | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/adjust-tray-height-image-ysh6u6pr.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A39Z&se=2026-11-18T21%3A17%3A39Z&sr=b&sp=r&sig=Gz29rC0rAbsskEOdgeVPmIOCm0uqNnBch5AsT7bckK4%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/adjust-tray-height-image-fuwk4qhh.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A39Z&se=2026-11-18T21%3A17%3A39Z&sr=b&sp=r&sig=DPDCiIvqRMgf98J6oHjyrJLZ425GdEQ%2BXZpQqvxFykw%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/adjust-tray-height-image-8x4dpddy.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A39Z&se=2026-11-18T21%3A17%3A39Z&sr=b&sp=r&sig=GLBCeMy0xE16jRV8Rav51xaYYIfnMTz0hwlrG9r3DbY%3D) | | 4) Unplug the tray cable connector. | 5) Take out the tray. | | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/adjust-tray-height-image-fie5iwpu.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A39Z&se=2026-11-18T21%3A17%3A39Z&sr=b&sp=r&sig=CVvmuG2w5V%2FnzwtzaSBxetqnF3P%2FRlliT3%2FoAxbNfPY%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/adjust-tray-height-image-fuh9cjqs.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A39Z&se=2026-11-18T21%3A17%3A39Z&sr=b&sp=r&sig=TuduulMzBdkwa1ADbFBSXZbInQXXVEtEi5OWrhZI%2F0w%3D) | | #### **Adjust the height of the slide rails** | 1) Remove the tray slide rail screws at both sides. | 2) Unhook the slide rails from the holding holes. | **Note:** The distance between two contiguous holding holes is 2cm. | | --- | --- | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/adjust-tray-height-image-0b6188rg.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A39Z&se=2026-11-18T21%3A17%3A39Z&sr=b&sp=r&sig=c5JQS3x4NYYe0T0xnMotx27VF2IMMg33VExwJoJ4O%2Bo%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/adjust-tray-height-image-y0c560o3.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A39Z&se=2026-11-18T21%3A17%3A39Z&sr=b&sp=r&sig=3t2U3SEL9mvKtHM5JdDWugwlCIHVHqXSkzq12l14JDI%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/adjust-tray-height-image-w948la9d.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A39Z&se=2026-11-18T21%3A17%3A39Z&sr=b&sp=r&sig=xQV6cXI1lReTDu%2By4124hn5F7H9md2%2BVVWgVdSn9wAU%3D) | | 3) Adjust the slide rails to the proper height and fasten with screws. **Note:** The height of the slide rails at the two sides should be the same. | 4) Install back the tray. | |