The customer can exchange the bills for coins so that the coins can be used for coin-operated machines.

Before Using,
1. Please ensure the Coin Changer application is on the idle screen and the LED light is blue.
2. The coin hopper must be filled with only one type of coin, consistent with the type you set on the machine.

The transaction flow is as follows:

Insert a single bill into either bill acceptor, and the bill is validated and transported to stacking in the cash box immediately.

Note: If the bill cannot be validated or accepted by the software, it will be returned to the customer.

Based on the bill value, it will calculate the appropriate number of coins to dispense. For example, a $5 bill will dispense 20 x 0.25 coins.

Note:
• Users can tell whether the device is capable of accepting bills or if it is presently out of service, by looking at the primary light positioned at the top of the door, the lights found below each bill acceptor, and the lights located within each bill acceptor’s opening.
• When coin dispensing begins, the LED light inside the coin cup will turn on and should remain on for 30 seconds after the final coin has been dispensed.
• If another bill is inserted into a bill acceptor during a transaction, it will validate and stack into the cash box immediately, then it will wait until the first transaction is completed before performing the next transaction.

Cash Prefill