Site Data contains the parameters of the site where the product is to be deployed, such as site code, location information, payment options, etc. Follow the instructions below to configure the parameters for that site.
Click “Site Data” then all fields to configure will be displayed. Please define the fields one by one; you can refer to the table below for descriptions of the fields.
The Location ID and Site Code defined herein should be same as the Location ID and Site Code that you created on Vendor Portal.
|
|
Field Name | Value Needed | Description |
Location ID | Alpha-Numeric | To select a certain location that is created in Location Management > Create Location. You can enter a keyword of the location name to narrow down the display list. |
Room# | Numeric | To enter the room number that is created in Location Management-Location-Rooms. |
Double Tap Timeout | Numeric | This value is set for the laundry cards that require double taps to make transactions when starting a machine. If the time interval between the two taps exceeds the value defined here, the transaction will be terminated. The default value 0 means double tap is not required to start a machine. |
Site Code | Numeric | When a certain location is selected, the corresponding Site Code will be automatically matched. |
Machine # | Numeric | Keep the default settings here. When the reader profile is setup in KLM, the Machine# will be filled out. |
Screen Rotation | Drop-down Choice (0/90/180/270 degrees) | This field applies to Ultra LX Series only. When the Ultra LX Series reader is installed in a rotated position other than the default upright one, this parameter should be defined accordingly so the screen display is readable to users. |
Ignore Site Code | Check Box | It decides whether to verify the site code of the cloud-based card/value card used by customers. If it is checked, then the cards mentioned can be used across different sites under the same Vendor. If it is not checked, the site code of the card has to be consistent with that of the reader equipped for the machine. |
Non-Network Mode | Check Box | This field applies to Prime Connect Select and Elevate Card Connect reader. When it is checked, Wi-Fi based functions will be disabled so the reader won’t upload any report. |
Card Holder Mode | Check Box | This field applies to Prime Connect Select and Elevate Card Connect reader for Laundry market only. When it is checked, unlike the single-tap or double-tap cards, customers need to hold the laundry card to the reader until the machine is started. |
Hide Machine # | Check Box | This field applies to Elevate Card Connect reader. When it is checked, the reader will not display Label ID. |
Payment Options | Check Box | Select the payment options to be supported. |
CR/DR Card Type | Check Box | Select the card icons to be displayed on readers. This field is required when “Credit Card/Debit Card” is selected as the “Payment Options.” |
Converter Reader Type | Drop-down Choice | This field is required only when the Converter reader is used. Select from the drop-down list (Disable/ESD reader/Heartland reader/Greenwald reader/Blackboard). |