Install Reader, Modem to the Station

Prepare four M4*12 screws and a screwdriver.

Find the installation position.

Insert the reader into the opening space from outside.

Fasten four screws to secure the installation.

Find the provided MDB cable (with male connectors on both ends).

Cut the cable tie securing the MDB cable.

Connect one end of the MDB cable to the reader and the other end to the machine's MDB port.

Find the installation position.

Use 2.5*6 screws to attach the mounting plates to the modem.

Place the modem with the mounting plates at the proper position and tighten the nuts.

Find the antenna hole (the right one) on the roof of the machine and remove its rubber plug.

Insert the antenna wire through the hole.

Fasten the antenna from the bottom.

Connect the Wi Fi and 4G connectors respectively.

Plug the power cable.