--- title: "Troubleshooting" slug: "clone-software-installation" updated: 2025-09-08T21:54:25Z published: 2025-09-08T21:54:25Z canonical: "support.kiosoft.com/clone-software-installation" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Troubleshooting ## If there are any updates regarding the troubleshooting, please refer to the document [KioSoft POS Troubleshooting & FAQ](https://kiosoft.document360.io/shared/5de1b9d8-c3c7-4fe9-a09e-11a195b9b9da) # # Troubleshooting | Common Problems | Possible Reasons | Solutions | | --- | --- | --- | | KioSoft POS | Device is not responding | - Cable disconnected - Power off | - Check cable connection - Check power - Use KLM to get reader info to get version number, status - Use KLM to perform Factory Reset to retry installation | | Screen is black | - No power - Not turned on | - Check power - Open the Switch of KioSoft POS | | Failed to register/top off but other functions work well. | - The SRC and injected Key don’t belong to the same vendor. | - Reinject Key with the correct Key card | | | Sync Server Failed on Initialization Screen | - Time zone not set - Server Url configuration | - Check Time zone for location - Check Url configuration | | Cash Drawer | Can't open cash drawer | - Locked - Jammed | - Check cable connection - Check power | | Printer | Printed receipts are blank | - Roll is upside down - Wrong type of paper | - Make sure the paper roll is correctly positioned - Check paper type | | Scale | The scale disconnected. | - The connection type is not assisted with the communication protocol. - The scale is not open. | - Open the Scale - Reconnect the scale according to the user manual | | The reading weight is incorrect. | - In Tare mode. - Or other errors. | - Press Zero button - Press Tare button - Restart the scale | #