--- title: "Config Edge Box" slug: "config-edgebox" updated: 2026-03-03T07:10:40Z published: 2026-03-03T07:10:40Z canonical: "support.kiosoft.com/config-edgebox" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Config Edge Box Please follow the steps below to configure Edge Box via KLM. | 1. After logging in to the KLM app. Tap the Sandwich button at the top left corner and select Service. | | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-2XB4E5IR.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A38Z&se=2026-11-18T21%3A17%3A38Z&sr=b&sp=r&sig=QfNQkIFdg5yWHTG0cQHRlv3W4fxHFAv0bC8emfuT6yw%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-21EKANDD.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A38Z&se=2026-11-18T21%3A17%3A38Z&sr=b&sp=r&sig=WqZAGhdpFg2NBjL4oXQr98S3thpro2ZnP4xOsi311%2FA%3D) | | 1. Select the "Config EdgeBox" button. | 1. Then, tap the "Scan QR Code" button to scan the QR code on the reader and configure the EdgeBox. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-GHYGMUS4.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A38Z&se=2026-11-18T21%3A17%3A38Z&sr=b&sp=r&sig=2RtZtW9XdkN4IcogkB9C0ST%2F%2F0ZHXQrZQGmYWu0UxzY%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-236ZM679.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A38Z&se=2026-11-18T21%3A17%3A38Z&sr=b&sp=r&sig=Z%2FKQ2WpqibxqQQ6UAyeE5JCa0cO3mPDqexnKb1tIt7E%3D) | | 1. It should display: "Send Config Command Successfully." | | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-OQG9QGSP.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A38Z&se=2026-11-18T21%3A17%3A38Z&sr=b&sp=r&sig=Jc0SjdFPX5vOSPeq7QYTD2ISf22TIuWefDWtlUi%2FtU0%3D) | |