--- title: "Use of J1 PINs" slug: "definitions-of-j1-pins" updated: 2026-05-21T16:03:02Z published: 2026-05-21T16:03:02Z canonical: "support.kiosoft.com/definitions-of-j1-pins" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Use of J1 PINs This article intends to provide instructions on the use of J1 pins of Ultra VQ-FM. ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-BTGQQR3M.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A18%3A03Z&se=2026-11-18T21%3A18%3A03Z&sr=b&sp=r&sig=%2FlspwKanPHUFdsdQDHDXazA2xhy3ItleubMrMKLxYZE%3D) | **PIN No.** | **Function/Use** | | --- | --- | | P1 | P1 is used for coin input. | | P2, P8 | P2 and P8 support the serial mode of laundry machines. P2 is used for receiving signals (TTL COM, Rx). P8 is used for transmitting signals (TTL COM, Tx). P2, P8, and a GND pin are needed for TTL serial communication. | | P3, P4 | Jumper A | Used for RS232 serial mode. P3 is Rx, P4 is Tx, and P5 is GND. | | Jumper B | Used for Relay Pulse P3 is Relay 2, and P4 is Relay 1. | | P5 | GND pin. | | P6 | GND pin. | | P7 | P7 is used for power output (+DC 5V) | | P9 | P9 is used for power input (-DC12V, -DC24V or -AC24V) | | P10 | P10 is used for power input (+DC12V, +DC24V or +AC24V) | 1. Communications apply to different machines: - TTL COM: Alliance, Maytag, LG, etc. - RS232: gameboard, vending machine, etc. 2)When the Gameboard is connected, RS232 communication will be supported: - Switch manually to Jumper A, and PIN3, PIN4, and PIN5 are needed for use. 3) When a relay pulse machine is connected: - Switch manually to Jumper B, and PIN3 and PIN4 are needed for use.