--- title: "Coin Changer: Installation" slug: "deploy-3-install" updated: 2025-09-09T23:35:27Z published: 2025-09-09T23:35:27Z canonical: "support.kiosoft.com/deploy-3-install" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Coin Changer: Installation It is suggested for you to install the Coin Changer according to the chart below. | **The Back View of the Wall** | | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/e6e757379ed6c0b0f2cda234252f2fc(1).png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A37Z&se=2026-11-18T21%3A17%3A37Z&sr=b&sp=r&sig=LPi%2FkrdmRQt8i1WbRrYk7%2BmYGn3nnPzLnH1eRVPNIZI%3D) | Here are the two types of walls with different depths where the Coin Changer can be mounted to. | **Thin Wall** 110-124mm 4.33-4.88inch | **Standard Wall** 256-271mm 10.08~10.67inch | | --- | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/e4be3bb4563872ab9de03aed8de2631(1).png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A37Z&se=2026-11-18T21%3A17%3A37Z&sr=b&sp=r&sig=Nd1AwcPXUpIkf2QSCmzA29GLqwp00XVNnY%2FiN3r0FaE%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/c4614344df8e37fc78a1d3060c54840.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A37Z&se=2026-11-18T21%3A17%3A37Z&sr=b&sp=r&sig=TRpHnyW4y2RbV6LehGN4dN2meqvyRXdyOhfZlxBQZ9g%3D) | | 1. Make a square hole throughout the wall to place the Coin Changer, drive four Ф14×35mm (Ф0.55 *1.38 inch)holes on* ***the back of the wall*** *(the kiosk door side) and install M10×60 (0.39*2.36 inch) expansion bolts to fix the Coin Changer. > [!NOTE] > Note: The minimum hole depth required is 35 mm (1.38 inch). | 1. Install the wing plates (2 pcs) using M10×20 mm (0.39*0.79 inch) bolts and nuts. | | --- | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/363523bc7759f17f531cfd1e25a4e63.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A37Z&se=2026-11-18T21%3A17%3A37Z&sr=b&sp=r&sig=QVAxs%2FMyOgzcv3KAR1xwEgM0KF1xv0%2FyAHrIca1F7aE%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image(345).png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A37Z&se=2026-11-18T21%3A17%3A37Z&sr=b&sp=r&sig=yTtux8UD0aaZGvlLDXcKnXjGdTvhkT8%2BIbbMIqUSD50%3D) | | 1. Place the kiosk in the wall and fix it with the nuts for the expansion bolts used. | 1. The completed back side of wall mounting is as shown. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image(344).png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A37Z&se=2026-11-18T21%3A17%3A37Z&sr=b&sp=r&sig=zv7KLpb0NY6aiyw7RCVQkAKuFYjRy91i26%2FQGAM%2FRbg%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image(317).png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A17%3A37Z&se=2026-11-18T21%3A17%3A37Z&sr=b&sp=r&sig=XHz8aqlb0gyqFTrkhyFswOpAHTEbpmHhPFnyJ6nAiVM%3D) |