Ultra VQ-FM has supported Dexter X machines as an option of payment media. This article will be a brief instruction on the deployment of the reader compatible with the target machine type.
Scope and Limitations
Country: All Countries based on Payment Service
Languages: English, Spanish, and French
Market: Laundry Market
Payment Types: Bank Cards / Cloud Cards / Value Cards / App / Coin & Bill / Campus Solution
Minimum Terminal Version Requirement: 2500.005.002.002
Manual Programming
Press the programming button on the machine panel for 2 seconds. The machine will enter the programming mode.
Manual Programming
The machine must be in idle mode for the manual programming menus to be accessed. Idle mode is when the machine is not actively running a cycle and the vend price is displayed on the screen. To enter the manual programming mode, the top of the machine must be unlocked and lifted slightly. The programming button should be pressed for 1~2 seconds. The control should display the manual programming home page.
|
|
Singer Dryer & Stack Dryer | Washer |
Serial Mode Settings
In Vendor Portal→CCM→Profile Builder →Site Data, configure the settings in site data. You can refer to CCM - Profile Builder - Site Data for detailed instructions.
In CCM → Profile Builder → Dexter → Dexter X series, select the target machine type (Washer/Single Dryer/Stacked Dryer).
Save the profile after the selection.
Pulse Mode Settings
In Vendor Portal→CCM→Profile Builder →Universal→Universal Pulse, configure the settings for the machine. You can refer to General Deployment Process for reference.
For Dexter X‑Series machines, you must enter the following specific values for the pulse settings:
Output Type: RelayPulse
Pulse Polarity: Idle Open
Output Pulse Gap: 300
Output Pulse Duration: 50
Save the profile after the configuration.
