--- title: "InHand Modem System Enclosure Box User Manual" slug: "inhand-modem-system-enclosure-box-user-manual-1" updated: 2025-12-15T01:21:14Z published: 2025-12-15T01:21:14Z canonical: "support.kiosoft.com/inhand-modem-system-enclosure-box-user-manual-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # InHand Modem System Enclosure Box User Manual The document is intended to introduce what a user should do once receiving the InHand Modem system enclosure box kit. Please refer to the steps below when you receive an InHand Modem system enclosure box kit. | 1. Open package and remove foam. | | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/netkit.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A51%3A56Z&se=2026-11-18T21%3A51%3A56Z&sr=b&sp=r&sig=ma2t1gtzJn3TbRrmA6CJt4J33psueR4%2BJYTJHZ%2BjqJ4%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/netkit 2(1).jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A51%3A56Z&se=2026-11-18T21%3A51%3A56Z&sr=b&sp=r&sig=tHWdxO9Jen2lg5ohENoREjCCJatVOFZUxgbwR3yIiUY%3D) | | 1. Carefully remove the Ubiquiti access point. Note: If you are mounting the access point in ceiling, follow the video for guidance. ([https://www.youtube.com/watch?v=v4SwAB5fhaE](https://www.youtube.com/watch?v=v4SwAB5fhaE)). | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/AP2.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A51%3A56Z&se=2026-11-18T21%3A51%3A56Z&sr=b&sp=r&sig=oMfWkTukuNHEom%2FUxbhMIfjors%2BW17I%2BHK3VR0XjMHw%3D) Ubiquiti Access Point | | 1. Once Access point is mounted, connect the ethernet from the ceiling access point to the switch port. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/AP.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A51%3A56Z&se=2026-11-18T21%3A51%3A56Z&sr=b&sp=r&sig=v%2Fp%2B7aNhciLGoB8qC9woKWYnxtu2X%2BlVm21d10PGz1M%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-3A3FGBRO.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A51%3A56Z&se=2026-11-18T21%3A51%3A56Z&sr=b&sp=r&sig=yWj6ldZwFkEIbV9aA%2BcrppmUlKHI6wiB%2BduQX%2FnyWfU%3D) | | 1. Next connect the Blue ethernet cable from the switch box to kiosk 1. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-JJKB2RAM.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A51%3A56Z&se=2026-11-18T21%3A51%3A56Z&sr=b&sp=r&sig=iMZqJ6a7jMyScA7xZ%2FiskQBqyxwp4qjOW%2BvixE8iPlk%3D) | | 1. Plug the power cord from modem into outlet A on RPCM | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/rpcm2.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A51%3A56Z&se=2026-11-18T21%3A51%3A56Z&sr=b&sp=r&sig=It0LKqB4wgn4c%2BpfudII%2FJFf4aZBJqsekqM2TFBJhmY%3D) RPCM | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-IM2WE0WM.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A51%3A56Z&se=2026-11-18T21%3A51%3A56Z&sr=b&sp=r&sig=3qzrIP%2FzDiNBYT3WVOsLGGlG1Youd3ietsXWvHcCPSw%3D) | | 1. Plug the power cord from the switch into outlet B on RPCM. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-3GU6Z8EQ.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A51%3A56Z&se=2026-11-18T21%3A51%3A56Z&sr=b&sp=r&sig=x5F31lVH302xkLdxkYK2%2BN0kMqHFAEA%2ByvztxmqIifQ%3D) | | 1. Plug RPCM into the wall outlet. | | 1. Plug the power cord from Edge box Network Kit into the wall outlet. |