--- title: "InHand Modem System Enclosure Box User Manual" slug: "inhand-modem-system-enclosure-box-user-manual" updated: 2025-12-15T01:21:14Z published: 2025-12-15T01:21:14Z canonical: "support.kiosoft.com/inhand-modem-system-enclosure-box-user-manual" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # InHand Modem System Enclosure Box User Manual The document is intended to introduce what a user should do once receiving the InHand Modem system enclosure box kit. Please refer to the steps below when you receive an InHand Modem system enclosure box kit. | 1. Open package and remove foam. | | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/netkit.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A18%3A01Z&se=2026-11-18T21%3A18%3A01Z&sr=b&sp=r&sig=UPQ5OKBYghPlS0xgDH5%2Bd4hUVIHB9fdH8he6%2B9lEUAA%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/netkit 2(1).jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A18%3A01Z&se=2026-11-18T21%3A18%3A01Z&sr=b&sp=r&sig=6O6nF4nlnZ6zRQMCm0O%2Fvw8ovT5padbiukvp%2BqbunYQ%3D) | | 1. Carefully remove the Ubiquiti access point. Note: If you are mounting the access point in ceiling, follow the video for guidance. ([https://www.youtube.com/watch?v=v4SwAB5fhaE](https://www.youtube.com/watch?v=v4SwAB5fhaE)). | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/AP2.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A18%3A01Z&se=2026-11-18T21%3A18%3A01Z&sr=b&sp=r&sig=o%2F%2FFDmAfMOslDQHMMUwo5P3HttBJG%2FeqmKc9O61OQeg%3D) Ubiquiti Access Point | | 1. Once Access point is mounted, connect the ethernet from the ceiling access point to the switch port. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/AP.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A18%3A01Z&se=2026-11-18T21%3A18%3A01Z&sr=b&sp=r&sig=Vg4C6FsfbXmokDMZ2wFOlFaHs4YC%2FQbQNSAib4nPpTQ%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-3A3FGBRO.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A18%3A01Z&se=2026-11-18T21%3A18%3A01Z&sr=b&sp=r&sig=RgPHJTqWNVxoJeasOtrkh9fEltJCjnWa1Zd7rt5SkJA%3D) | | 1. Next connect the Blue ethernet cable from the switch box to kiosk 1. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-JJKB2RAM.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A18%3A01Z&se=2026-11-18T21%3A18%3A01Z&sr=b&sp=r&sig=iUkHRXGpn%2BD3VcGq6H8%2F3o31aP2Pc8sT7TPpRyRDYQE%3D) | | 1. Plug the power cord from modem into outlet A on RPCM | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/rpcm2.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A18%3A01Z&se=2026-11-18T21%3A18%3A01Z&sr=b&sp=r&sig=WLOmuGXAO2UIfgyVilUUl0U4f5%2BzsJXzbpsk8P%2FPRn4%3D) RPCM | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-IM2WE0WM.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A18%3A01Z&se=2026-11-18T21%3A18%3A01Z&sr=b&sp=r&sig=f3Ksbymq%2Bico2uiiDLhiGbNU2fMOkWHZG09tmETqUIk%3D) | | 1. Plug the power cord from the switch into outlet B on RPCM. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-3GU6Z8EQ.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A18%3A01Z&se=2026-11-18T21%3A18%3A01Z&sr=b&sp=r&sig=ltrMsQwECy2rCnunMUCTJ%2B0cnyYynYh7ERjY8rDy%2BeM%3D) | | 1. Plug RPCM into the wall outlet. | | 1. Plug the power cord from Edge box Network Kit into the wall outlet. |