1) Detach the upper part by pinching the latch | 2) Unplug the wires from the backside. | 3) Match the three holes at the back of the coin changer to the three screws on the mounting plate |
| 
| 
|
4) Loosen the three screws a bit. | 5) Hang the changer through the three screws. | 6) Attach the upper part. |
| 
| 
|
7) Plug back the two wires. | 8) Check the coin channel and mechanism. | 9) Connect the MDB cable of the coin changer to the machine. |
| 
| 
|
Take Coinco changer as an example. Please contact the KioSoft support team for the installation guide of the other type of changer.