Install Coin Changer (In Sidecar)

1. Detach the upper part by pinching the latch.

2. Unplug the wires from the backside.

3. Remove the three nuts below the coin input on the back of the door.

4. Match the three mounting holes of the coin changer to the three screws.

5. Fasten the 3 screws with the nuts.

6. Attach the upper part.

Note: Make sure the mechanism aligns correctly with the coin return lever.

7. Reconnect the wire.

8. Check the coin channel and mechanism.

9. Connect the MDB cable from the coin changer to the bill acceptor.