1) Find the installation position. | 2) Use 2.5*6 screws to attach the mounting plates to the modem. | 3) Place the modem with the mounting plates at the proper position and tight the nuts. |
|
|
|
4) Find the antenna holes at the roof of the machine. Remove the rubber plugs as per the actual requirement. Note: there are two reserved holes for dual antennas design. | 5) Insert the antenna wires through the hole. | 6) Fasten the antenna from the bottom with the nut. |
|
|
|
7) Connect the WIFI and 4G connectors respectively. | 8) Plug the power cable. | |
|
|
Install Modem
- Updated on Oct 9, 2026
- Published on Sep 24, 2026
- 1 minute(s) read
Was this article helpful?







