--- title: "Ir302 Cellular Modem Troubleshooting" slug: "ir302-cellular-modem-troubleshooting-1" updated: 2025-05-16T15:56:54Z published: 2025-05-16T15:56:54Z canonical: "support.kiosoft.com/ir302-cellular-modem-troubleshooting-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Ir302 Cellular Modem Troubleshooting ### Issue Ir302 Cellular Modem Troubleshooting --- ### **Environment** Inhand Ir302 Cellular Modem --- 1) Confirm the modem’s physical connections are secure, reseat the connections if needed. If you make any changes to the antenna connection, please power cycle the modem. - The **Wi-Fi antenna** is connected to the Wi-Fi connection on the modem, shown above on the right side of the modem. - The **4G antenna** is connected to the Cellular1 connection on the modem, shown below on the left side of the modem. - Please connect the power cable last. Power is connected to the DC 9-36V connection, closer to the Wi-fi antenna. ![Device connections including Cellular, WAN, LAN, and power input ports are visible.](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/ir302 connections.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A48%3A32Z&se=2026-11-18T21%3A48%3A32Z&sr=b&sp=r&sig=sVJnI%2BJcmRA5vjhEqsRuS0zq2RWwZzb5S4%2F8ndjIkws%3D) - If you are hardwiring a KioSoft Reader (VXT/VQ-M) or a Kiosoft Kiosk (VC Series or AVU Touch) to receive internet from the cellular Ir302 modem, please connect the ethernet cable in the LAN2 port. If there is a data flowing, the port's lights (yellow & green) will be flashing. ![The image shows a device's ports, highlighting the LAN2 connection for network setup.](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/ir302 connections LAN 2 connection.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A48%3A32Z&se=2026-11-18T21%3A48%3A32Z&sr=b&sp=r&sig=3peF7h7CbtF%2BTfSIn2lgmAaBkjWhoW81naSgGwN3JLY%3D) 2) Allow the cellular modem to establish internet connection by waiting a full minute. 3) Confirm the current modem status by using the LED lights: ![Device status indicators for power, status, cellular, signal, and Wi-Fi connectivity.](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/ir302 modem lights.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A48%3A32Z&se=2026-11-18T21%3A48%3A32Z&sr=b&sp=r&sig=4PqZxjJfOP3LbXyPd4VZDNoJbT1Vh6xZkMoWPsLkj9c%3D) Ideally, all of the modem’s lights should be solid, with only the Wi-Fi light flashing consistently. You can refer to the chart below for reference. | Ir302 Modem LED Indicator Chart | | --- | | ![Table displaying power, status, and cellular descriptions for device indicators.](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/Modem lights ir302 meaning.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A48%3A32Z&se=2026-11-18T21%3A48%3A32Z&sr=b&sp=r&sig=c1q%2Fbyy%2BJKpp9QVt1Di7W2kPOeMLSFJkkaR7cz%2Bqr7M%3D) | 4) Unplug the modem from power and confirm the SIM card is located in the correct position on the SIM card tray, see image below for visual reference. **CAUTION: Do not press the ‘Reset’ button. This will erase the modem configuration settings specific to KioSoft equipment.** ![SIM card tray with slots for SIM1 and SIM2, and a reset button.](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/SIM tray Ir302 image.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A48%3A32Z&se=2026-11-18T21%3A48%3A32Z&sr=b&sp=r&sig=Iwrs6N0aLM1i9vh7IfHZQ8MWFuEpuMHypr1FULhwNVc%3D) 5) If the modem is being used with KioSoft readers, you can use the “Get Reader” command in the KLM app under the **Service** menu. This command provides valuable insight into the reader’s current status, including its internet connectivity, the Wi-Fi network it is attempting to connect to, and the Wi-Fi signal strength. | Example of Get Reader Info | Network Related Fields on Get Reader Info | | --- | --- | | ![Device information including IP address, SSID, and connection status displayed on screen.](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/get reader info - network issues.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A48%3A32Z&se=2026-11-18T21%3A48%3A32Z&sr=b&sp=r&sig=pRKC7KsHU85eouXBCfTfqO4vziC4yDskpWw96RpTkJI%3D) | **Device IP:** The IP address assigned to the device when it is connected to the modem. **SSID:** The Wi-Fi name to which the reader is programmed to connect. **Device Status:** Connection status to internet. - Connected – The reader is connected to both the modem and the internet. - No Internet – The reader is connected to the modem but has no internet. - Disconnected – The reader is not connected to the modem. - N/A – not applicable, where wi-fi option is disabled **Wi-Fi Signal Level:** The strength of the Wi-Fi signal from the reader to the modem. Ranges from 0 to 100, where 100 indicates no connection to the modem. | 6) Call into the KioSoft Support line for further assistance. A KioSoft Support team agent can confirm SIM to make sure it is active. Phone Toll Free: 1-888-KIOSOFT (546-7638) Phone Local: 561-810-5936 email: [support@kiosoft.com](mailto:support@kiosoft.com)