Merge Spiral Slots

Steps in Summary

Power off the machine.
Move out the tray where the slots to be combined are located.
Remove the divider board in between.
Check and replace the spiral if necessary.
Adjust the motor plug if necessary.
Adjust the price tag.
Reinstall the tray.
Program the combination in the Android system.
Test

Notes about the Spiral Direction
Make sure the left spiral is rotated left, meanwhile, the right spiral is rotated right.

Notes about the Motor Direction Plugs
Make sure the motor plug matches with the rotate direction of the spiral.

Notes about the Slots Combination Rules
1. The singular slot should be the left/first slot and the plural slot should be the right and second slot. For example, slots 1 & 2, slots 3 & 4, and slots 5 & 6 can be combined.
2. Only the two slots next to each other can be combined. Slots belonging to different trays can’t be merged.

Step 1: Power off the machine

Step 2: Move out the tray

1) Lift up the tray fixing buckle.	2) Hold up the front end of the tray, then pull out the tray.	3) Cut the ribbon fastening the cable at the back side of the tray.

4) Unplug the tray cable connector.	5) Take out the tray.

Step 3: Remove the divider

1) Pull off the fastening buckles of the divider at the back side of the tray.	2) Hold the outside end of the divider and gently pull up and remove the divider.

Step 4: Replace the spiral and adjust the motor plug

1) Check if the left spiral rotates left and the right spiral rotates right.	2) If not, find the opening on the slot chuck. Hold the outside end of the spiral and twist it toward the opening with a certain strength.	3) With a clear click sound, the short head of the spiral will drop to the opening area and now you can pull out the spiral.

4) Hold the correct spiral, clip the first ring, and then put the short head into the opening and rotate it back until you hear the clear click sound and feel like the spiral head is tightly stuck.	5) Adjust the motor plug. Make sure the right rotates the spiral connecting to the right plug while the left rotates the spiral connecting to the left plug.	6) Reinstall the tray and connect the tray cable to the cabinet. Arrange and bind the wiring harness.

Step 5: Adjust the price tag

1) Remove the slot number tag of the left/first/singular slot. Use the slot number tag of the right/second/plural slot. For example, after the merging of 11 lanes and 12 slots, the merged lane is 11.

Merge Belt Slots

1) Pull up the tray fixing buckle.	2) Hold up the front end of the tray, then pull out the tray.	3) Unplug the tray cable connector.

4) Pull off the fastening buckles of the divider at the back side of the tray.	5) Hold the outside end of the divider and gently pull up and remove the divider.	6) Pull out the fastener plug at the top of the motor.

7) Unhook the outside end of the belt from the tray.	8) Adjust the distance between the two belts.

Program the combination

Please refer to Merge Slot.