--- title: "Move out the tray" slug: "move-out-the-tray" updated: 2026-09-24T09:22:56Z published: 2026-09-24T09:22:56Z canonical: "support.kiosoft.com/move-out-the-tray" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Move out the tray | 1) Pull up the tray fixing buckle. | 2) Hold up the front end of the tray, then pull out the tray. | 3) Cut the ribbon fastening the cable at the back side of the tray. | | --- | --- | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/move-out-the-tray-image-sqzsvqoh.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A48Z&se=2026-11-18T21%3A31%3A48Z&sr=b&sp=r&sig=%2FCATaIcoWd4SPuVlH6L1fChmfOR%2BILMmKtAQJcFusv8%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/move-out-the-tray-image-llso779w.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A48Z&se=2026-11-18T21%3A31%3A48Z&sr=b&sp=r&sig=rUL3iXG3HtgqdLYQBNK%2BElcATd35t9IQaNWx1%2BnMZaY%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/move-out-the-tray-image-cjy92jg7.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A48Z&se=2026-11-18T21%3A31%3A48Z&sr=b&sp=r&sig=teYBdszoxqeoN63bPBjf7NleECeORG%2FpO0SlQpTt9WM%3D) | | 4) Unplug the tray cable connector. | 5) Take out the tray. | | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/move-out-the-tray-image-hoz799vz.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A48Z&se=2026-11-18T21%3A31%3A48Z&sr=b&sp=r&sig=3l2h9hqwNytnmPAlxDyhsQYFvhm4VYH7PYsqT9EdOAI%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/move-out-the-tray-image-agen3rmw.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A48Z&se=2026-11-18T21%3A31%3A48Z&sr=b&sp=r&sig=%2FX3R5SKdV524e4AyHKL7Ik9eCZK25Dm2r9%2F6FHFwqZc%3D) | 1. **Adjust the height of the slide rails** | 1) Remove the screws of the tray slide rail at both sides. | 2) Unhook the slide rails from the holding holes. | **Note:** The distance between two contiguous holding holes is 2cm. | | --- | --- | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/move-out-the-tray-image-tzezut5r.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A48Z&se=2026-11-18T21%3A31%3A48Z&sr=b&sp=r&sig=ix4vbKPKFlUdzWA1RqcPxh2U8LLkMb6da9BvJM1IAEg%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/move-out-the-tray-image-6kk58out.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A48Z&se=2026-11-18T21%3A31%3A48Z&sr=b&sp=r&sig=8CJKBNRkKNCQ4JEJMqh3PcoREmg7mrZPHQAi1Y7k6eM%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/move-out-the-tray-image-k7bym9w6.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A31%3A48Z&se=2026-11-18T21%3A31%3A48Z&sr=b&sp=r&sig=1RJ6Fy9WqV1jKC3KPZbwHnBW7QoSb7ZxTJ1w0%2B6u3u4%3D) | | 3) Adjust the slide rails to the proper height and fasten with screws. | 4) Install back the tray. | **Note:** The height of the slide rails at the two sides should be the same. | *KioVend TF45E2 User Manual, V1.0.1 / 2025-10-20 Copyright ®2025 KioSoft Technologies*