In the “Operation” section, select slot and press the “Test lane” button to test. This section only tests the slot dispensing motion, which means the spiral of the tested slot will rotate a full circle. (Take spiral slot as an instance)
Test single slot: Select the slot which you want to test and press the “Test lane” button. You will see test status and results indications on the screen.
Test batch slots: Select the start slot and then input the end slot number to define test interval, then press the “Test lane” button.
Note: If an error code shows up during testing, click the “clear error” button to remove it. If it reappears, please inspect the machine.
K