--- title: "Set Slot Mode" slug: "set-slot-mode-1" updated: 2025-10-10T01:10:16Z published: 2025-11-03T02:17:40Z canonical: "support.kiosoft.com/set-slot-mode-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Set Slot Mode The "Set Slot Mode" function allows operators to configure the dispensing mechanism of specific slots, choosing between different modes such as belt or spiral. ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-8RGO6QM3.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A51%3A49Z&se=2026-11-18T21%3A51%3A49Z&sr=b&sp=r&sig=1wSb9Txu8a4X%2F3yPO0IUsRzNrQNJhiIjoGK3ZgFIsj0%3D) > [!NOTE] > The set slot mode should match with actual slot type. > > *If an actual belt slot is set as “Spring”: slot motor might stop before the product on the belt completely drops to the delivery area; if an actual spiral slot is set as “Belt”: the slot motor might keep the spiral rotating until the product is detected by drop sensor.*