--- title: "Set Slot Mode" slug: "set-slot-mode" updated: 2025-01-31T18:51:09Z published: 2025-01-31T18:51:09Z canonical: "support.kiosoft.com/set-slot-mode" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Set Slot Mode The "Set Slot Mode" function allows operators to configure the dispensing mechanism of specific slots, choosing between different modes such as belt or spiral. > [!NOTE] > Note > > The set slot mode should match with actual slot type. > > If a belt slot is incorrectly configured as "Spring," the slot motor may stop before the product on the belt has fully dropped into the delivery area. Conversely, if a spiral slot is mistakenly set as "Belt," the slot motor may continue to rotate the spiral until the product is detected by the drop sensor. ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image(707).png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A48%3A25Z&se=2026-11-18T21%3A48%3A25Z&sr=b&sp=r&sig=EImA3X3bfAgpsCf61jtqfw87TfzicnJ%2BPsh0BXSF2EA%3D)