Step 1: Remove the Packaging

Remove all packaging materials, including wooden cases, cartons, adhesive tape, foam, and protective film.

Note
Upon receiving the machine, please inspect the packaging carefully.

Step 2: Get the Key

The power cord and keys are secured with a cable tie on the protective grid at the back of the machine. Use a flush cutter to cut the tie and get the keys.

Step 3: Open the Door

Insert the key into the keyhole and open the door.

Turn the key clockwise to the right; the lock handle will automatically pop up.
Pull out the lock handle and rotate it counterclockwise approximately ten full turns.
Open the door as shown in the pictures.

Step 4: Take Out the Kit Bag From the Pickup Bucket.

The kit bag contains the spare parts, the feet adjusting wrench, and mounting plates for peripherals.

Step 5: Remove the Secure Cable Ties

Use a cutter to cut the secure cable tie at the two sides of each tray.

Step 1: Remove the Packaging

Step 2: Get the Key

Step 3: Open the Door

Step 4: Take Out the Kit Bag From the Pickup Bucket.

Step 5: Remove the Secure Cable Ties

The Unpacked Machine

Unlock the Door