--- title: "Wiring Instructions for Dexter C-Series Machines with Supported Readers (PK1A0012)" slug: "wiring-instructions-for-dexter-c-series-machines-with-supported-readers" updated: 2026-09-04T00:53:39Z published: 2026-09-04T00:53:39Z canonical: "support.kiosoft.com/wiring-instructions-for-dexter-c-series-machines-with-supported-readers" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Wiring Instructions for Dexter C-Series Machines with Supported Readers (PK1A0012) This document provides wiring instructions for Dexter C‑Series machines using PK1A0012, covering washers, single dryers, and stacked dryers. Please follow the steps below to complete the wiring. --- ## Scope and Limitations Reader supported: All readers --- ## Wiring Instructions for Serial Mode ### **Parts List** | Part Number | Part Name | Items Included | | --- | --- | --- | | PK1A0012 | Dexter C-Series Serial Kit | WH1A0015 - Dexter C-Series Serial Reader Harness AS1110148 - Laundry Serial Interface Module WH1A0016 - Dexter C-Series Serial Machine Harness PS100007 - Power Adapter, 12V for CleanReader WH111004 - 120Vac Long Power Cable, Universal 2 x PP000003-Wire Tap Splice | --- ### **Connections Illustrations** > The actual color of the wires differ from the picture. Please refer to the wire colors shown in the diagram. | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-6H3XCA8G.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A38%3A14Z&se=2026-11-18T21%3A38%3A14Z&sr=b&sp=r&sig=9NAD5Q8N81Dl%2BhE731EB3CowEYIXJXxm6d0iHf74s2E%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-73FHV223.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A38%3A14Z&se=2026-11-18T21%3A38%3A14Z&sr=b&sp=r&sig=JOskK4VRswIKlmCUA4plMb0dF5TwVtbGvGWdqTxWB0A%3D) | | --- | --- | | WH1A0016 - Dexter C-Series Serial Machine Harness | WH1A0015 - Dexter C-Series Serial Reader Harness | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-LJGUN3GD.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A38%3A14Z&se=2026-11-18T21%3A38%3A14Z&sr=b&sp=r&sig=mpTxuazf%2BgYkASvVLsvM5UytEFXRqKM9NUQayhANevE%3D) | | The wiring diagram of Dexter C-Series - Serial Mode | --- ## Connection of the Laundry Serial Interface Module > [!NOTE] > For Elevate Card (versions later than 4500.002.000.007), Elevate Touch, Elevate Solo, and Ultra LC/LW/LT, the Laundry Serial Interface Module is optional. If not used, connect the WH1A0016 directly to the reader. 1. Connect the 10-pin end of WH1A0016 to the Laundry Serial Interface Module. | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-CS4QGUM3.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A38%3A14Z&se=2026-11-18T21%3A38%3A14Z&sr=b&sp=r&sig=WEZvgya5YC5rsg7Pa034QI84%2FQi2psEKhdpwZ1Qozh8%3D) | | --- | 1. Connect the other end of WH1A0016 to **P10** on the machine control board for the **dryer**, and to **P9** on the control board for the **washer**. | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-K8RD14C1.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A38%3A14Z&se=2026-11-18T21%3A38%3A14Z&sr=b&sp=r&sig=tIlWCVU%2BmuD766zL27yGp81h30k4jKSKC%2FUDnuOlI0o%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-L678XLFW.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A38%3A14Z&se=2026-11-18T21%3A38%3A14Z&sr=b&sp=r&sig=3ZBT2JCLA76ElHS1kKEPdFdxFnIcRUyz6EpGJNZSL8w%3D) | | --- | --- | | Dryer Control Board | Washer Control Board | 1. Connect the 6-pin end of WH1A0015 to the Laundry Serial Interface Module, and the other end to the reader. | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-QI7DA424.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A38%3A14Z&se=2026-11-18T21%3A38%3A14Z&sr=b&sp=r&sig=WDsFtFlS9KHrQNABcrG2wRRUaLKfqhp6bvi8IA7rQ%2Bs%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-PEZX2RWD.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A38%3A14Z&se=2026-11-18T21%3A38%3A14Z&sr=b&sp=r&sig=gcuqNVR4DSlpVVz7Gsc7UzLys31rDZIXcmAn%2BGdpc9A%3D) | | --- | --- | --- ## Power Connection 1. Connect the 2-pin end of WH1A0016 to the power adapter. And connect the power adapter to the 2-pin end of WH111004. | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-QY4XNKWI.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A38%3A14Z&se=2026-11-18T21%3A38%3A14Z&sr=b&sp=r&sig=A%2Fz%2F1oJUs7D09uHjMDHaIdo8LdoCBSzDsfYrM1JtFG0%3D) | | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-1J29UPYS.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A38%3A14Z&se=2026-11-18T21%3A38%3A14Z&sr=b&sp=r&sig=kgvaUw22mfU5r%2FrBBo2RZQxqF94bff8z1MpRKMG0d6Y%3D) | 1. Tap-splice the black wire of WH111004 to the machine’s 120V HOT, and the white wire to its 120V NEUTRAL. ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-1GZZIE3S.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A38%3A14Z&se=2026-11-18T21%3A38%3A14Z&sr=b&sp=r&sig=qMgtobhlHS9i%2FQHkNXDckNS%2FpMj7uG5s1ETeWoJvwSY%3D) > For the wiring instruction of Dexter-C series in pulse mode using PK1A0001, please refer to [How to wire a Dexter (WCAD) Washer with Ultra Series Reader (PK1A0001)](https://support.kiosoft.com/shared/fc786b33-ab1c-4185-9701-1d876ee36c60)