--- title: "Wristband Kiosk Installation: Paper Loading" slug: "wristband-kiosk-installation" updated: 2026-07-08T05:37:53Z published: 2026-07-08T05:37:53Z canonical: "support.kiosoft.com/wristband-kiosk-installation" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.kiosoft.com/llms.txt > Use this file to discover all available pages before exploring further. # Wristband Kiosk Installation: Paper Loading The document provides a detailed guide on loading wristband paper and receipt paper. It outlines the steps to load the paper into the printer. This includes inserting the axle into the paper roll, positioning the roll correctly, and ensuring the paper passes through the printer correctly. The guide emphasizes the importance of proper alignment and securing components to ensure functionality. Overall, the document serves as a comprehensive resource for users to successfully load the wristband and receipt paper. ## Wristband Paper Loading Due to the different structures of the wristband printers, the ways to load wristband paper vary. Please first determine your wristband printer’s structure. If there is an internal PCB Board Bracket and a tray for your wristband printer, please refer to Version 1; if there is no tray at the bottom of the wristband printer and the PCB is installed on the wristband printer cover, please refer to Version 2. Please follow the steps below to load the wristband paper. ### Version 1: With an Internal PCB Board Bracket and a Tray | 1. Pull out the tray of the wristband printer | 1. Insert the axle into the paper roll. | | --- | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-FFO38Z3C.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=o%2B0J16u0r2iGj9%2F%2F3SBy34Ayb8to8rSUH%2FRrPXlQZhs%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-882FD11D.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=vADpuvU%2BoKxpFuWMmK8VZ3nqm6j9xnbTBQk401owLLA%3D) | | 1. Put the paper roll on the bracket and ensure the black mark on the paper faces inward. | 1. Insert the paper into the wristband printer. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-AI92TQCM.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=SDro6se2ge6ZR%2Bk5S0EsmUgqJMEP9GNV%2B%2F2B7N2XXXU%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-YHFYZC86.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=%2B2hhrrRfuLdnHC%2FXUTNT%2BL%2FjrwLqhWMdmozBsvVuVI4%3D) | | 1. Press down on the two yellow buttons on the sides of the wristband printer, and at the same time lift up the printer cover. **Note:** Do not lift it from the middle upward when opening the wristband printer cover to prevent hand cuts. There is a blade in the middle part. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-UJHTEFWR.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=ZJiBP4II5VVsB2sZDXE%2Fq4RpjVi8858hLlt3XgKqOOQ%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-LA0UPS5B.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=J2kYLmiQWfi6%2FtUlXH22sBGcqSiT2GPjOmkMDdiDrFs%3D) | | 1. Then you'll see a PCB Board and its bracket. Press the lower bracket (to keep it stable), and at the same time, gently lift up its upper PCB fixed bracket. **Note: Do not touch the PCB Board to avoid damage!!** | 1. Pull the paper, and pass from behind the roller. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-YRAQ9H74.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=D5dE0m2tEOt0u13ufSsYFa6iYZWUBPijZz4iZkffWUk%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-XLFXNLOY.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=anztHgGexlv4FVqefMadQXV2nF6jEAyTvIl2O4X2O%2Fg%3D) | | 1. Then pass it from the hole between the roller and the fixed bracket. Meanwhile, please ensure this sensor has been moved to the rightmost corner. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-5P28BN3L.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=A0izbqqQFQNz56U5cBDKI3Q60wcEPjJda1eDnReuXpk%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-PWJ8MC39.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=EmkRJggyZIBjOV4E15uus7iYng56gvkrvjn%2B1tplti4%3D) | | 1. Insert the paper into the seam at the bottom of the wristband printer. Don’t insert too much paper. Please align the black mark with the sensor at the bottom when inserting the paper. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-EE46EV4R.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=1wpi8KoZk1xjmqMMa4JoWIwQrJr6d%2BqAANVzceOJhkU%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-KESNWV0C.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=Tl4C96ukIchpwJFQZVR%2FyQ8hpgakt03xOrYqASV6F58%3D) | | 1. Press the lower PCB bracket (to keep it stable). Meanwhile, close the upper PCB board fixed bracket. **Note: Do not touch the PCB Board!** | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-1MV9ODNU.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=Db%2BLdqoeDlyaR1omE3isGVAak5RSVrqph1PL02rmflk%3D) | | 1. Close the wristband cover. Then the device will automatically adjust the wristband paper’s position, and the light will be blue. **Note: Please ensure the upper PCB board fixed bracket has been closed before closing the wristband cover!!** | 1. Push the wristband printer back until it reaches the end of the tray. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-0YMSIT6W.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=ALZUP3IcOGRNOyX7pDsj15UDZkkHIwPmiMxdIclb058%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/7f1728b72d51d3f47a3078bf46f3db6d.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=ozHxNJHpVJRx%2FtQWUEESzuXS6muppq%2Bv0i8iky%2Be%2Bx8%3D) | > [!WARNING] > Note: > > If the printed wristband paper is unclear, as shown in the image 1 below, please power off the printer first, and then use a alcohol pad to gently wipe the roller and the black area above it, like image 2. > > | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/a8635879a42542349dff2cb2dc90df4d.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=SssCdPXZJD3PBekUCFal2UPY%2FyKATBaTvBGlnqt7vLw%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/fa3c06fc2341ae3a8b642a9bb3850dc7.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=UQ5G2%2BQ%2BLpx2P5CazEOUS2281qwD9NtssUIIgZLsqZI%3D) | > | --- | --- | ### Version 2: With a PCB Board Bracket Installed on the Cover of the Wristband Printer | 1. Insert the axle into the paper roll. | 1. Put the paper roll on the bracket and ensure the black mark on the paper faces inward. | | --- | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-A8MIOF1A.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=S7%2BuSSVnJeYRQyHHHRZqfpDnFzG1jVxY7vcGQGexUL4%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-V4X2YXM5.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=VHmxh0PNOAe74Cc1FUmRZYUHNQgi7bHjAF%2BnsqP4jhE%3D) | | 1. Insert the paper into the wristband printer. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-AD6KQXB0.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=fsyb2gTedX63CCqrFNCY11b%2BrE%2FbZCIfzH6L%2FfU7p0Q%3D) | | 1. Press down on the two yellow buttons on the sides of the wristband printer, and at the same time lift up the printer cover. **Note:** Do not lift it from the middle upward when opening the wristband printer cover to prevent hand cuts. There is a blade in the middle part. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-XDUCWR1Y.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=Dz7dSJA216JTCV8z3epwaBQ55Y6d6LZEiglzhOy%2BklA%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-8CMCUWFJ.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=MDeuzaFhjRHK7mpf5HNYeYK9By8%2ByVTpjq67CqJzJt4%3D) | | 1. Pull the paper, and pass from behind the roller. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-21NAJRZO.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=OW%2BejpoMsHdjoRtIKzVX6WVHCkUAGqMW6aDOMTGjs18%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-ALFES3I3.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=AZQPpU62HBWKzxymYF%2FWVUHq7th1FGUmDdXZr6lX2sw%3D) | | 1. Then pass it from behind the roller at the lower bracket. Meanwhile, please ensure this sensor has been moved to the rightmost corner. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-WX61OI2U.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=PQY9y%2B65l8HAByYsLfn%2BUE1hobZvPVxTyjoc0lZILnU%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-BJ0QNYY0.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=H8jwO0mJAFqXpRvv5o677XTCvP%2FjpOXANwkvVz3Sf8I%3D) | | 1. Insert the paper into the seam at the bottom of the wristband printer. Please align the black mark with the sensor at the bottom when inserting the paper. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-5Q0ONYX1.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=gPDcZHm8etoAJbomL1iS7K8kARuvGbvq3f9XwiUerPo%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-Q39Z8B9H.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=bdWgZq8jL%2Bx%2FHpW7eMS45uNAlXm7bCShStUPBeb0ojs%3D) | | 1. Close the wristband cover and the light will be blue. **Note:** After loading the wristband paper and closing the cover, the device will automatically adjust the wristband paper’s position, which may cause the wristband paper to fold. Please manually and gently pull it to check, to ensure the wristband paper does not get stuck inside. | | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-5HU1T72P.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=H230UTHtcpOIzCDmUF0ftOMGdN2q1hvjiK6cqM1wPTg%3D) | | #### **Correct** | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/0bacee1c1125e0a438e5e57f99897aaa.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=xQJvW6SKk3QZxIlfowbI7BbBzanadKhEYJmRyjIebzs%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-WBFDUO81.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=J8KCf9JWT9RUsVtTHH6M3MGeWESR1HoWe2NEgx63Ixc%3D) | | --- | --- | #### Wrong | Not inserted into the seam | Not inserted vertically | Inserted into the seam too long | | --- | --- | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-J5LCF0KY.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=bGkSRv6qfffaOpIbhXewFCxV%2FaRFg6NAKt1V9I4wdy0%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-7PBO70VX.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=DPmwyfLY6EBpTKBbmgjpNWnbPDqFtoq8CEMhU8aKfPI%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-L8ED0SI4.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=aBE1tvkYAkhzTC6rW7qDTXw4D0tWb5JWXJAA1sBj54s%3D) | | Passed the paper over the two rollers or one of the roller | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-FW9E8E78.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=rltL%2F2pDK3Tdo5eBndmGzgWr1t0pQ%2FvVfCy3nm8Tvys%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-OU22X6YL.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=bo%2FweA6JZbD39re5xFHFHtLBCLE2RhL3wy%2FgP%2FQW5KM%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-25TOK51A.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=jV%2BL%2FXDrT6dmz9hSTf375TIbjoyQDSXxggWNGZm43%2FY%3D) | > [!WARNING] > Note: > > If the printed wristband paper is unclear, as shown in the image 1 below, please power off the printer first, and then use a alcohol pad to gently wipe the roller and the black area above it, like image 2. > > | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/a8635879a42542349dff2cb2dc90df4d.jpg?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=SssCdPXZJD3PBekUCFal2UPY%2FyKATBaTvBGlnqt7vLw%3D) | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/fa3c06fc2341ae3a8b642a9bb3850dc7.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=UQ5G2%2BQ%2BLpx2P5CazEOUS2281qwD9NtssUIIgZLsqZI%3D) | > | --- | --- | ## Receipt Paper Loading Please follow the steps below to load the receipt paper. | 1. Insert the axle into the paper roll. | | --- | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-BWXBIEJV.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=64cmxgqJ52chXIOrc2yNOT2n31IIUcwlZYpQdmTyp9w%3D) | | 1. Place the paper roll onto the bracket. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-WONOMGXT.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=mhZLX%2F76xWSfWRSGCnU61LQNwlAhrOEOi8p8OQB2g%2Bw%3D) | | 1. Insert the paper into the place between the axle and the black bottom. | | ![](https://cdn.document360.io/43d8b414-8496-484c-a971-494dc8473827/Images/Documentation/image-JGQYQ2MW.png?sv=2026-02-06&spr=https&st=2026-11-18T20%3A57%3A45Z&se=2026-11-18T21%3A57%3A45Z&sr=b&sp=r&sig=tRsEFS1A8MSmU8pdMtILfH%2FybVACwAyHDHE7BAfhQPk%3D) |