1) Place the product directly on the tray. It is not recommended to pull out the tray when loading products because an uneven tray may result in the issue of the product being squeezed.
2) A single belt slot is available for seven goods due to the belt’s limited bearing capacity (Single belt slot: 2.5kg/5.5lbs | Dual belt slot: 4.5kg/9.9lbs).The thickness of the product should be greater than 50 mm to stand stable on the belt.
3) Wrong practices that should be avoided when loading the belt slot:
The product is too small relative to the width of the belt. | The product is not positioned at the center of the belt. | An unusually light product may rotate on the belt slot, potentially triggering the light sensor by mistake. |
|
|
|
A thin product may fall backward on the belt slot. | If a product leans against the one in front of it, they may both fall together. | The longitudinal length of the product should be less than 100 mm. Otherwise, it may activate the light sensor before it is fully moved out. |
|
|
|
