1) Find the installation position. | 3) Prepare the mounting plate. | |
|
|
|
4. Attach the mounting plate on bill acceptor as shown. | 5) Fasten the plate using screws. | 6) Remove the nuts that remain on the machine. |
|
|
|
7) Insert the mounting plate into the opening space. | 8) Fasten the four screws at both sides. | 9) Connect the MDB cable to the machine. |
|
|
|
1) Find the installation position. | 2) Use 2.5*6 screws to attach the mounting plates to the modem. | 3) Place the modem with the mounting plates at the proper position and tighten the nuts. |
|
|
|
4) Find the antenna holes at the roof of the machine. Remove the rubber plugs as per the actual requirement. Note: there are two reserved holes for dual antennas design. | 5) Insert the antenna wires through the hole. | 6) Fasten the antenna from the bottom with the nut. |
|
|
|
7) Let the wire go through the opening on the top of the control cabinet. | 8) Connect the Wi-Fi and 4G connectors respectively. | 9) Plug the power cable. |
|
|
|
