Tools and Parts

SN	Parts Number	Parts Name	Picture	QTY
1		Ultra VQ-M		1 pc
2	PP6Q0189	Reader mounting plate		1 pc
3		Socket screwdriver		1 pc
4		Cross screwdriver		1 pc
5		M4*12 screws		4 pcs
6		MDB splitter harness (male to female/male heads)		1 pc

Installation Procedure

Step 1: Find the Installation Position

Open the door and slide out the control cabinet; you will find the reader mounting position shown in the picture:

Step 2: Remove the Cover Plate

Use the socket screwdriver to remove the four flange nuts securing the cover plate, then take off the cover plate.

Step 3: Find the Reader Mounting Plate

If the TSD 36 Vending machine is newly unpacked, the mounting plate should be included in the kit bag that comes with the machine.

Step 4: Install the Mounting Plate

Align the holes at the four corners of the mounting plate with the four screw stems at the mounting location. Ensure the slanted corner is positioned at the top right, as shown in the picture.

Step 5: Install the Ultra VQ-M

Attach the reader from the outside of the mounting hole, aligning the screw holes at its four corners with those on the mounting plate.

Step 6: Secure the Screws

Use M4*12 screws to secure the reader on the mounting plate.

Step 7: Wiring

Connect one male end of the MDB splitter harness to the MDB interface of the VQ-M, and attach the other male end to the reserved female MDB port on the machine.

Install Reader