Merge Spiral Slots
1. Make sure the left spiral is rotated left, meanwhile, the right spiral is rotated right. | 2. Make sure the motor plug matches with the rotated direction of the spiral. |
|
|
General steps:Power off the machine.
Move out the tray where the slots to be combined are located.
Remove the divider board in between.
Check and replace the spiral if necessary.
Adjust the motor plug if necessary.
Adjust the price tag.
Reinstall the tray.
Program the combination in Android system.
Test.
Note: 1. The singular slot should be the left/first slot, and the plural slot should be the right and second slot. For example, slots 1&2, slots 3&4, and slots 5&6 can be combined.
2. Only the two slots next to each other can be combined.
3. Slots belonging to different trays can’t be merged.
Step 1: Power Off the Machine
Step 2: Move out the tray
1) Lift up the tray fixing buckle. | 2) Hold up the front end of the tray, then pull out the tray. | 3) Cut the ribbon fastening the cable at the back side of the tray. |
|
|
|
4) Unplug the tray cable connector. | 5) Take out the tray. | |
|
|
Step 3: Remove the divider
1) Pull off the fastening buckles of the divider at the backside of the tray. | 2) Hold the outside end of the divider and gently pull up and remove the divider. |
|
|
Step 4 & 5: Replace the spiral and adjust motor plug
1) Check if the left spiral rotate left and right spiral rotate right. | 2) if not, find the opening on the slot chuck. Hold the outside end of the spiral and twist it toward the opening with certain strength. | 3) With a clear click sound, the short head of the spiral will drop to the opening area and now you can pull out the spiral. |
|
|
|
4) Hold the correct spiral, clip the first ring, and then put the short head into the opening and rotate it back until hearing the clear click sound and feeling like the spiral head is tightly stuck. | 5) Adjust the motor plug. Make sure the right rotate spiral connecting to the right plug while the left rotate spiral connecting to the left plug. | 6) Reinstall the tray and connect the tray cable with the cabinet. Arrange and bind the wiring harness. |
|
|
|
Step 6: Adjust the price tag
1) Remove the slot number tag of the left/first/singular slot. Use the slot number tag of the right/second/plural slot. For example, after the merging of 11 lanes and 12 slots, the merged lane is 11. |
|
