Merge Belt Slots
- Pull out the tray
1) Pull up the tray fixing buckle. | 2) Hold up the front end of the tray, then pull out the tray. | 3) Unplug the tray cable connector. |
|
|
|
4) Pull off the fastening buckles of the divider at the backside of the tray. | 5) Hold the outside end of the divider and gently pull up and remove the divider. | 6) Pull out the fastener at the top of the motor and unhook the outside end of the belt from the tray, then adjust the distance between the two belts. |
|
|
|
- Program the combination in the Android system
Use an admin account and password to log in to the Android vending machine management system. Navigate to the “Slot Management” section from the left menu.
- Merge: choose neighboring slots, then press "Merge" to merge them. Use the “Whole layer merging” button to merge the slots of the whole tray. (Slots of different trays can’t be merged.)
- Split: select double-slot or merged slots and split them into singles. Use the “Full layer splitting” button to split the slots of the whole tray.
- Add: manually add a slot if not displayed on the driver board for a newly added tray.
- Delete: remove unnecessary or non-existing slots.
- Set as spring freight lane: select the slot (s), then press the button “Freight Lane mode setting”.
- Set as belt freight lane: Please refer to Chapter 4 Slot Management - Set as belt freight lane for detailed configuration.
Note: Remember to click "Save" to preserve the settings and restart the machine to activate them.
|
