Section 1 Diagrams of Elevate Touch and Mounting Plates

You can refer to the diagrams of Elevate Touch and its mounting plates when performing the mounting and installation procedures.

Mounting Hole for Elevate Touch (Vertical/Horizontal)

Section 2 Mount Elevate Touch onto Game Machine

Remove two nuts from Elevate Touch.	Thread the splitter cable through the access port on the machine.
Use the screwdriver to tighten the nuts.

Section 3 Physical Connection With/Without Gameboard Version 2

a. Elevate Touch Supported With Gameboard Version 2

To connect Elevate Touch with the machine and Gameboard Version 2, you can follow the steps as below:

Step 1. Connect Elevate Touch to Gameboard Version 2 by using the cable (WH710066).

Step 2. Connect Gameboard Version 2 to power supply.

Step 3. Connect Gameboard Version 2 to the Game Machine.

Gameboard Version 2 Connection with Power Supply and Game Machine
For the Gameboard Version 2’s connection with the power supply and game machine, please refer to the Gameboard Version2 Installation Guide for detailed wiring instructions.

b. Elevate Touch Supported Without Gameboard Version 2

If Gameboard is not included to support Elevate Touch, you can follow the steps and wiring as below:

When you receive an Elevate Touch product, you will find two cables extending from the reader module. The cables are integrated with the reader, eliminating the need of additional purchases.
Cable 1: Male Cable (features contact conductors with protruding pins) for log checking (used by the technician to retrieve logs for field deployment).
Cable 2: Female Cable (features contact conductors with recessed holes) for Game machine connection.

Step 1. Connect the Male cable for log checking (if it is needed by the technician for field deployment work).

Step 2. Connect the Female cable to the Game machine.

Note: For detailed instructions on the physical connection between Gameboard and multiple devices, please navigate to the Gameboard Version2 Installation Guide.

3.5E Wiring Diagram