In Universal -> LG, you can build a special CCM profile that is exclusively designed for LG Top Load Washer 1.8.1. Click on the tab Universal -> LG -> LG Top Load Washer 1.8.1 to enter this section and you will see 6 sub-tabs and each of the 6 tabs will be introduced in the following content.

Location

Please input the Location ID, Room ID and Site Code of the machine to be configured.

Machine Profile

This section is used for machine operation function control and washing mode configuration, including control of spin only mode, deep clean mode, pause, tubclean function, configuration of number of rinses per cycle, minutes per rinse, spin speed, and water level, etc.

Please fill in the customized settings and parameters to optimize the machine operation.
Refer to the table below for filling instructions of the fields.

Note: Hover your mouse pointer over the question marks behind each field name, you can view filling tips.

Feature 1

This group of settings is for special function control. You can control whether to enable several special functions like Spin Only, UB Error, Tubclean, Deep Rinse, Pause, etc.

No.	Fields	Description	Explanation
1	Data Set Identifier	Please keep the default value and make no change.
2	Spin Only Enable	Enable/disable the “Spin Only” mode
3	UB Error Enable	Enable/disable the “UB Error”
4	Tubclean Button Enable	Enable/disable the “Tubclean” button
5	Deep Rinse Enable	Enable/disable “Deep Rinse” mode
6	MULT: Multi-housing LAUN: Coin-Laundry	Switch between MULT: Multi-housing and LAUN: Coin-Laundry	Check is LAUN mode, uncheck is MULT mode
7	Pause Enable	Enable/disable “Pause” function
8	Activate the Forced Shutdown button on the Pay model	Enable/disable the “Forced Shutdown” button on the Pay mode

Feature 2

SSEn allows you to enable or disable the softener (fabric conditioner) input alarms. It is disabled by default, and you can tick the checkbox to enable the feature.

Feature 3

This section controls the rinse/agitate mode, spin speed, water temperature, water level and dehydration settings.

This machine model (non-heater) has:

2 Rinse types: Jet and Deep；
4 Water temperature options: Hot, Warm, Cold, and Delicate;
3 Water levels: Low, Middle, High

You can set combinations of the above parameters to optimize your washing course program.

No.	Fields	Description	Valid Value
1	Number Rinse per Cycle (Jet/Hot)	Define how many rounds of rinses for one cycle of Jet/Hot course	1-5 (integer)
2	Number Rinse per Cycle (Jet/Warm)	Define how many rounds of rinses for one cycle of Jet/Warm course	1-5 (integer)
3	Number Rinse per Cycle (Jet/Cold)	Define how many rounds of rinses for one cycle of Jet/Cold course	1-5 (integer)
4	Number Rinse per Cycle (Jet/Delicate)	Define how many rounds of rinses for one cycle of Jet/Delicate course	1-5 (integer)
5	Number Rinse per Cycle (Deep/Hot)	Define how many rounds of rinses for one cycle of Deep/Hot course	1-5 (integer)
6	Number Rinse per Cycle (Deep/Warm)	Define how many rounds of rinses for one cycle of Deep/Warm course	1-5 (integer)
7	Number Rinse per Cycle (Deep/Cold)	Define how many rounds of rinses for one cycle of Deep/Cold course	1-5 (integer)
8	Number Rinse per Cycle (Deep/Delicate)	Define how many rounds of rinses for one cycle of Deep/Delicate course	1-5 (integer)
9	Minutes Rinse/Agitate (Jet/Hot)	Set how many minutes per rinse/agitate of Jet/Hot course	7-11 (minute, integer)
10	Minutes Rinse/Agitate (Jet/Warm)	Set how many minutes per rinse/agitate of Jet/Warm course	7-11 (minute, integer)
11	Minutes Rinse/Agitate (Jet/Cold)	Set how many minutes per rinse/agitate of Jet/Cold course	7-11 (minute, integer)
12	Minutes Rinse/Agitate (Jet/Delicate)	Set how many minutes per rinse/agitate of Jet/Delicate course	7-11 (minute, integer)
13	Minutes Rinse/Agitate (Deep/Hot)	Set how many minutes per rinse/agitate of Deep/Hot course	14-18 (minute, integer)
14	Minutes Rinse/Agitate (Deep/Warm)	Set how many minutes per rinse/agitate of Deep/Warm course	14-18 (minute, integer)
15	Minutes Rinse/Agitate (Deep/Cold)	Set how many minutes per rinse/agitate of Deep/Cold course	14-18 (minute, integer)
16	Minutes Rinse/Agitate (Deep/Delicate)	Set how many minutes per rinse/agitate of Deep/Delicate course	14-18 (minute, integer)
17	Top Spin Speed (Hot)	Define the top spin speed separately for Hot/Warm/Cold/Delicate course	Select from: Max /1000 /900 /800 /700 /600 /500 RPM
18	Top Spin Speed (Warm)
19	Top Spin Speed (Cold)
20	Top Spin Speed (Delicate)
21	Water Level (Hot)	Define the water level separately for Hot/Warm/Cold/Delicate course	Select from: Low/Middle/High
22	Water Level (Warm)
23	Water Level (Cold)
24	Water Level (Delicate)
25	Dehydration UE Count		1-3 (integer)
26	UE Shut down (minutes)	UE shut down delay time	1-10 (minute, integer)

Feature 3: Type Menu

No.	Fields	Explanation
1	Payment Type	Payment/free
2	Vend Type	Card/coin
3	Card reader Type	Greenwald/ESD
4	Coin drop Type	50ms/100ms

Audio Visual

In this section, you can set the display and sound settings of the reader.

Hide Machine #: Disable: display the machine number on the reader screen; Enable: hide the machine number on the reader screen.
Screen Rotation: rotate the direction of the screen by 90/180/270 degrees anticlockwise.
Machine Beep Sound Volume: there are three options to select from: Off/Low/High

Products Price and Timing

In this section, you can define the price for the washing cycle to optimize and maximize your sales return.

No.	Fields	Description	Valid Value
1	Regular Price	Default price setup of all courses	0-999 (cents, integer)
2	Regular Hot Price	Hot course price	0-999 (cents, integer)
3	Regular Warm Price	Warm course price	0-999 (cents, integer)
4	Regular Cold Price	Cold course price	0-999 (cents, integer)
5	Regular Delicate Price	Delicate course price	0-999 (cents, integer)
6	Deep Rinse Price	Deep Rinse price	0-999 (cents, integer)
7	Wash Time (hot)	Set wash time of hot course	8-15 (minutes, 8-15)
8	Wash Time (Warm)	Set wash time of warm course	8-15 (minutes, 8-15)
9	Wash Time (Cold)	Set wash time of cold course	8-15 (minutes, 8-15)
10	Wash Time (Delicate)	Set wash time of delicate course	8-15 (minutes, 8-15)
11	Penny Increment Pricing Offset		0-4 (integer)

Data and Processing

This section is for configuring the network connection, data uploading, and machine reboot time, etc.

Please refer to the table below for filling instructions.

No.	Fields	Description	Valid Value
1	Data Upload	Upload report to the backend server	Enable/Disable
2	Data Upload Time	Customize data uploading time (settlement time)	Select time
3	Offline Mode	Use offline mode or not
4	WiFi SSID	The WiFi SSID of the router. Must be exactly the same as the WLAN WiFi SSID in router’s setup.
5	Reboot Time	Time to reboot the machine every day	Select time
6	Payment Gateway Options	It is determined by the gateway selected in Location Management => Payment Gateway => Reader Transactions.
7	POS ID / Terminal ID	This is a unique ID that associates the POS device with a unique merchant hierarchy.
8	Auth Code	It is a code provided to POS for the user to enter when doing POS Authentication.
9	Auth Factor	It is the Merchant's 5 digit US Zip Code or 6 character Postal Code.
10	Work Mode	There are four work modes: Retail/Master/Backup/Normal At present, all the work modes can support the pre-auth payment via tapping, swiping, inserting your bank card or using the contactless payment.

Payment Types and Methods

In this section, you can decide which payment types to enable for the machine operation. Please refer to the table below for filling instructions.

No.	Fields	Description	Valid Value
1	Payment Methods	There are nine types of payment methods available: KioSoft Mobile App KioSoft Laundry Card Credit Card/Debit Card Bill/Coin Cloud-Based Card/Transact Credentials Card Holder Atrium Credentials TouchNet Credentials Tick the payment methods that will be supported by the terminal.	Transact Credentials CardHolder Atrium Credentials are not currently supported.
2	CR/DB Card Type	There are five options: VISA Master Card Discover American Express Interac Check the one or ones whose icons will be displayed on the terminal.
3	Double Tap Delay	Set the double tap delay time of value card. When you tap for the first time, you will see the card balance. You need to tap a second time to confirm the payment. This parameter defines the time interval between the two taps. If the second tap exceeds the time you set here, the terminal will return to idle screen.
4	Auth Mode	This is the transaction type of the bank card. “Single”: A separate fee is deducted for each transaction. “Pre-auth”: Requests the bank to reserve the Pre-Authorization Amount for one day, during which transactions are deducted directly from the reserved amount.	At present, only “Single” and “Pre-Auth” are supported.
5	Pre Auth Amount	The amount of the Pre-Authorization type of transaction. The default value is 200 and the unit is cent.
6	Site Code Check	To check whether the site code of cloud-based cards and laundry cards is in accordance with that of the machine profile. When it is enabled, the site code of the two shall be the same in order to start the machine, otherwise the machine won’t start. If it is disabled, all cards under the same vendor can start machines with any site codes.

Appendix 1 List of Package Contents