In this section, you can make the Programming Card, which is used to program the reader, with the CCM Profile selected. To make the card, a terminal called Remote Card Programmer (RCP) is also needed. Click Make Cards on the navigation menu to enter the Make Cards section and follow the steps below for detailed information.
The RCP to make cards shall be connected to the CCM before use. You can refer to Remote Card Programmer User Manual for detailed steps.
Other types of cards can be also made in this section, but you need to go to General Cards section as stated in Chapter 4.8 General Cards to first determine the card type, then it will direct you to the Make Cards section for the following process.
|
1) Click the input box then enter the keyword(s) of the profile name to search for Profile needed.
|
2) Click the input box of Mode and select RCP Select from the drop-down menu.
|
3) After the selection of Mode, RCP and mData Card will appear. You need to click on RCP and select the Session ID (Make sure the Session ID selected matches what you see on the RCP’s screen). Then you move to the field mData Card and fill in the number of cards you’d like to make. Click on Make Card button.
|
4) You will see TAP on RCP’s display screen. Place the card on it and you will hear a beep sound. If the SUCC message comes up on the screen, it means you have successfully created the card.