CCM - Universal - Continental Girbau Max

In Universal -> Continental, you can build a special CCM profile that is exclusively designed for Girbau Max.

Click on the tab Continental -> Girbau Max to enter this section and you will see 5 sub-tabs and each of the 5 tabs will be introduced in the following content.

Location

The Location section will normally be displayed by default after you click the tab Girbau Max. If it displays otherwise, click on the tab Location to enter this section. As its name suggests, this section includes location-related parameters to be defined for the profile. Please define them as needed; you can refer to table below for descriptions of the fields.

Machine Profile

The features under this tab are not supported at present stage. You can skip this part.

Click on the tab Machine Profile to enter this section and define the parameters relating to the machine. You can refer to table below for descriptions of the fields.

Audio Visual

Click on the tab Audio Visual to enter this section and define the parameters as needed.

At present stage, only Hide Machine Number, Screen Rotation, Low Power Mode (Shallow) and Lower Power Mode Timeout are supported. Though descriptions about all displayed fields are provided in the document, you can go to the corresponding part below for configuration instructions and skip those that are not supported.

VXT Display Mode (Not Supported)

Click the option box beside the VXT Display Mode parameter and a drop-down list will be displayed. The prices are displayed on the Ultra VXT Series reader in two ways, i.e., Linear and Multi-price.

• If you select Linear, there is only one price displayed in the center, as shown in the picture on the right. You could click < or > to toggle the price shown.

• If you select Multi-Price, four prices will be displayed on one page. You could click < or > to toggle to another price page.

Hide Machine #

This parameter defines whether to hide the machine type and machine number displayed at the lower-left corner of the reader screen.

Click input box of “Hide Machine #” and select Enable/Disable as needed. If it is enabled then the machine type and number will be hidden and vice versa.

Screen Rotation

When the Ultra LX Series reader is installed in a rotated position, other than the default upright one, this parameter should be defined accordingly so the screen display is readable to users. You can define it by selecting from the 4 options: 0 degree, 90 degrees, 180 degrees, and 270 degrees.

Please note that the screen rotates in an anticlockwise manner.

Low Power Mode (Shallow) & Low Power Timeout

You can decide whether to enable the low power mode by selecting “Enable” or “Disable.” When you enable this function, the “Low Power Timeout” field will be displayed. Set the value for the timeout field, and the unit is seconds. When it times out, the reader’s screen will dim a little bit. Any operations when detected will re-trigger the reader including physical touch on the reader screen, inserting / tapping / swiping bank card, tapping laundry card and App connection.

Vendor Logo (Not Supported)

The Vendor Logo is displayed at the upper-right corner of the reader. Click the “Upload Image” button then choose the logo you would like to display from your local storage. Image standard 23x110 px (no greater than 34x160); Image Format: .png; Image Orientation: Horizontal Image.

Customer Logo (Not Supported)

The Customer Logo is displayed on the middle screen of the reader’s idle screen. Click the “Upload Image” button then choose the logo you would like to display from your local storage.

Color Effect (Not Supported)

If the machine you are configuring is categorized to a machine category that is already defined with Color Effect via Chapter 4.3.1 Machine Category, the corresponding configurations will auto-populate to this profile, and they are not editable here.

With Color Effect, users can define the color, effect and brightness of the External LED Kit and Reader Screen Border (LX/VX). There are three options in the drop-down menu of color effect: External LED Kit, Reader Screen Border (LX/VX) and None.

• External LED Kit allows the Amusement vendors to configure the color, effects, and brightness of the kit case. As its name suggests, it requires an external LED kit to achieve this function. This feature applies to Prime Connect Select (PCS), Ultra LX Series and Ultra VXT Series reader.

• Reader Screen Border (VX/LX) allows the vendors to add color and effects to the border of the reader screen. It doesn’t require any external kit in comparison with the External LED Kit. This feature applies to the Ultra LX Series and Ultra VXT Series reader.

This feature is not supported for PCS. Therefore, if you’re configuring PCS but select this feature by mistake in the drop-down menu of color effect, the following configurations (color, effect, and brightness) still serve for its external LED kit.

• None is the default option of this feature. When it is selected, you can leave all the followed fields about Color, Effect and Brightness blank.

When the External LED Kit or Reader Screen Border (VX/LX) is selected, you should give its further configuration of Color, Effect and Brightness for Regular, Special or Freeplay mode as you desire. You are provided with 16 options (see color panel below) for color selection, four options (Steady, Chase, Marquee, Rainbow) for effect and four options (100%, 75%, 50%, 25%) for brightness.

Regular mode is activated when Special Mode in Machine Profile is disabled; when One Time or Recurring is selected for Special Mode and relevant fields are configured, Special Mode is on, and when one of the special prices (such as Special Price, Special Min Price and so on) which are to be configured in Products Price and Timing, is set to 0, Freeplay Mode is activated.

Differences of the four effect patterns can be found in color and lighting which are elaborated and visualized as below for your reference.

• Steady: One color of light is always on.

• Chase: It begins with all lights off. Each light will be turned on one by one until a group of certain size are lit. As each new light at the leading edge is lit, a light from the tailing edge will be turned off. This continues until the leading light position moves back to the first position with which the group of lit lights continues around the screen. The chasing direction moves clockwise.

• Marquee: A group of three lights blinks in a way of full brightness, half brightness and no brightness. The moving direction is clockwise.

• Rainbow: This effect displays on the external LED kit and reader’s screen border with all the colors cycling around.

When Reader Screen Border (VX/LX) is selected, its configuration on Brightness is fixed.

Once there is a user action, the reader will exit the idle screen with its effects off and the light effects during the transaction process will adhere to fixed patterns. You can refer to the table below for descriptions of the fixed color patterns.

Idle Screen Title (Not Supported)

You could customize the idle screen title by entering the content you desire in the input box beside the Idle Screen Title parameter.

The title will be displayed on the top of the reader as marked with red box.

Special Mode Idle Screen Title (Not Supported)

This field defines the text displayed on the top of the reader idle screen for Special Mode (“Tap for Special” in this case).

Click on the input box of “Special Mode Idle Screen Title” and input the content you would like to display on the reader for promotion.

Data and Processing

Click on the tab “Data and Processing” to define data-related parameters. You can refer to the table below for descriptions of the fields.

Payment Types and Methods

In this section you can configure payment related parameters for your profile. Click the tab Payment Types and Methods to access this section and define the fields respectively. You can refer to the table below for descriptions of the fields.