Deploy VC Cash Kiosk in Cash Only Mode

1) Tap the KioSoft logo on the top center of the Ultra VXT for 5 times, input the 8–digit password and click “Confirm” to enter the main menu.  

2) Tap “Next” to move to next page of the main menu.

3) Tap Work Mode to enter it.

4) Tap “AVU Cash-Amusement” or “AVU Cash-Laundry” to select the mode.

Note: If the “AVU Cash-Amusement” mode is applied, network connectivity is required for functioning. See Chapter 1.4.4 for detailed actions to enable network connectivity.

5) Tap “OKAY” to reboot the reader.

6) If this page is displayed during rebooting, tap “CONFIRM” to continue the process.

Note: The error displays because its parameters haven’t been downloaded yet as it will be later in Chapter 1.4.2.

1) Tap “Terminal Config”.

2) Tap the Admin Card.

3) Enter the 4-digit password and tap the “Confirm” button.

4) Tap the “General” button.

5) Tap the “Param Download” button under “General”.

6) Enter the Reference ID provided by KioSoft and tap the “Confirm” button.

Parameter Download Process

After the parameters are successfully downloaded, please tap twice the “Back” button to return to the main menu.

1) Tap the “Next” button.

2) Tap the “Payment Method” button.

3) Tap the “CASH ONLY” button and then it will return to the Idle Screen.

1) Tap the “KioSoft” logo on the top center of the Ultra VXT for 5 times and input the 8–digit password to enter the main menu.

2) Tap the “Terminal Config” button.

3) Tap the Admin Card.

4) Enter the 4-digit password and tap the “Confirm” button.

5) Tap the “Config” button.

6) Tap the “A” button to edit.

7) Tap “U” (Page Up) to locate to the “Network Connectivity” parameter.

8) Tap the “A” button to edit.

9) Tap the “O” (OK) to confirm the “ENABLED” status.

10) Tap the “X” button to return.

11) A prompt message will pop up asking you whether to save the changes. Tap “D” (herein stands for “Yes”) and it will return to the main menu.