Feature Deployment Instructions: Supporting Girbau Genius

Elevate Solo now supports the Girbau Genius. The deployment of this feature follows the general deployment procedure outlined in General Deployment Process. This article will provide brief instructions on deploying the reader compatible with the target machine type.

Scope and Limitations

• Country: All Countries based on Payment Service

• Market: Laundry Market

• Payment Types: CleanPay App.

• Terminal Version Requirement: [Elevate Card][4500.003.001.003]

Create CCM Profile

1. You can create the CCM profile for your machine in the KioCentral system by logging in to the market server KioCentral → Vendor Portal → CCM → Machine Data → Girbau → Girbau Genius → Washer.

Program Prices

Program Price 1 to 8 corresponds to the (up to) 8 program prices that can be configured in the machine, and the price number here corresponds to the position in the list in the machine setup. Same for the option prices.

2. After setting up the profile to your needs, save it on the platform.

Machine Setup

1. Access the Setup Menus

Access the full setup menus by swiping right along the top of the screen.

Enter a full 6-digit access PIN (default 123456) and click Accept.

2. The Main Menu will default to the cycle setup options.

These settings are out of scope for payment system setup.

3. Access Gear Menu

The Gear Menu will be used to set Payment Settings, Saphire Connectivity, and General Settings.

3.1. Payment Settings Menu

Payment Settings will be used to set Payment Modes and Selection Modes.

3.1.1. Payment Modes

In the Payment Modes menu, if coins will be used, enable the Cash Icon.

Enable the Card Icon for card reader use. Do not enable the QR icon; it is for Girbau’s payment system use. The Vending icon could be enabled for a central payment system.

3.1.2. Selection Modes

The Selection Modes menu allows you to change how many cycles are available for selection on the machine. This should match the number of cycle prices selected on the CCM Profile.

3.2. Saphire Connectivity Menu

This allows access to the External Saphire Menu.

3.2.1. External Saphire Menu

To enable communication with the payment system, the Active setting must be set, and the Identifier must be set to match the Machine Number assigned to the payment device.

3.3. General Settings Menu

The General Settings Menu allows access to the Control Type Menu.

3.3.1. Control Type Menu

Ensure the Control Type is set to Vended.

4. Access Wrench Menu

The Wrench Menu allows access to the Setup Menu.

4.1. Setup Menu

The Setup Menu allows access to the Payment Systems Menu.

4.1.1. Payment Systems

The Payment Systems Menu is used to turn on or off the acceptance of coins.

If coins are used, ensure the proper Currency, Channel, and Pulse Value.