The product has been updated to support Moneris as a payment processor, enhancing the payment gateway options. To ensure proper functionality, specific configurations must be set during the deployment of the reader.
Scope and Limitations
Reader Version Number: [UltraVX][GLOBAL][V2100.002.002.013]
Country: Canada
Restrictions:
For deployment in Canada only
Contactless only
Define Settings on Market Server
To utilize Moneris as the payment processor, you need to add Moneris to the reader gateway on the vendor level.
Access Payment Gateway Settings: Log in and navigate to the Vendor Portal. Click on Settings > Payment Gateway. Find the "Payment Gateway - Reader" section.
Select Moneris:
Use the drop-down menu titled “Default Payment Gateway” to select “Moneris.”
Alternatively, click the “Add Another Gateway” button if you wish to add more options.
Enter Required Information: Once “Moneris” is selected, relevant fields will appear. Fill in these fields with the necessary details.
Save Changes: After entering the information, click the green “Save Changes” button to apply your configuration.
Creating Location & Room
If Moneris is set as the first option in the vendor-level Settings, any new/existing location will automatically use Moneris as the payment gateway by default. However, you can still customize the payment gateway for each location if needed.
To do this, navigate to Location Management > Create/Edit Location > Payment Gateway. By default, the location will follow the vendor-level settings, with the radio button selected on Vendor Default Settings for Payment Gateway Preference. All parameters will be uneditable as they are imported from the vendor settings.
If you select “Set Custom Gateway for This Location,” all parameters will be editable so you can customize it for this specific location. The drop-down of Payment Gateway only shows those configured on the Settings > Payment Gateway - Reader section.
Creating CCM Profiles
If Moneris is selected as the payment processor, it's necessary to define the Device ID when creating CCM profiles. You can find this parameter in the "Data and Processing" section of the Universal Pulse profile or in the CleanReader Ultra Data section for serial profiles, depending on the profile type you are creating.
Universal Pulse Profile
CleanReader Ultra Data
With these configurations performed, you can proceed to set up the reader using KLM.
Start A Machine
When starting laundry machines, there are two start-flow types:
1-step machines: All Pulse and Serial machines
2-step machines: LG, Maytag, Fagor, and some MDB machines
Steps may vary by model. Please follow the on-screen instructions on the reader.
Starting One-step Machines
1) Select a cycle on the laundry machine and tap the card to make a payment. | 2) Press the “Start” button on the machine. | 3) After the machine is started, an in-use screen will be displayed for a washer as follows. |
|
|
|
4) For an in-use dryer, a top-off page will be displayed as follows. | / | / |
| / | / |
Starting Two-step Machines
1) Touch the screen as prompted on the idle display. If a customer taps a bank card on the screen out of habit, the reader will interpret it as a touch input. | 2) Select a cycle on the laundry machine and press the “Start” button. | 3) Pay for the cycle. |
|
|
|
4) After the sale is approved, the machine will be started. | 5) The screens for an in-use washer and an in-use dryer with top-off support are shown below. | |
|
|
|
