How to create an Alliance Hybrid Profile

New
  • Published on Oct 17, 2025
  • 1 minute(s) read
Prev Next

Alliance Laundry Systems offers coin slide-controlled machines, which KioSoft refers to as 'Hybrid' in CCM.

Alliance Coin Slide

 

Site Data

1) Click on 'Site Data' and enter location information.

  • Site Code and Location ID must match the location in Location Management on Laundry Portal

  • For Location ID and Room#, you should enter the ones that you created previously

See image below regarding Site Data’s field values.

Form fields for Location ID, Site Code, Room number, and machine settings.

  1. Location ID

  2. Site Code

  3. Room Number

    • Each room will get its own profile.

  4. Non-Network

    • This should be enabled any time a modem is not present in the room.

  5. Card Holder

  6. Hide Label

    • This will hide the machine number on Connect and Elevate readers

2) Next for Payment Options, select the payment methods for the target location.

Reminder

Fill out the 'Site data' portion before filling out the 'Machine Data' information. If you fail to set the site data, your profile will not save to your target location.

Machine Data

1) After filling out the 'Site Data' tab with the information for your test location, select the 'Machine tab' → 'Alliance' → 'Hybrid' → 'Dryer'.

2) Click on the 'Advanced Options' button to view all machine parameters: 

A screenshot of a computer AI-generated content may be incorrect.

3) Start by entering the pricing parameters (100 = $1.00), and adjust the profile to have the Coin Slide option as enabled and the Inverted Hybrid as Disabled.

If the Coin Slide is not enabled

The Alliance Hybrid machines pulses twice after the payment, resulting in excessive drying time. Verify that the correct profile settings are being used.

Save Profile

1) Save your profile by selecting the drop-down option at the top left of the profile builder and choose the 'Save Profile' option. 

A screenshot of a computer AI-generated content may be incorrect.

2) Then, enter the custom text and click on the 'Save' button.

Related articles