How to create an MLE26/MLG26 machine profile

Updated
  • Updated on Oct 17, 2025
  • Published on Oct 17, 2025
  • 2 minute(s) read
Prev Next

It’s necessary to identify the machine details before building a profile.

MLG26's Display board

Maytag Model Number Decoder

 

 

Site Data

Click on “Site Data” and enter location information.

  • Site Code and Location ID must match the location in Location Management on Laundry Portal

  • For Location ID and Room#, you should enter the ones that you created previously

See image below regarding Site Data’s field values.

Form fields for Location ID, Site Code, Room number, and machine settings.

  1. Location ID

  2. Site Code

  3. Room Number

    • Each room will get its own profile.

  4. Non-Network

    • This should be enabled any time a modem is not present in the room.

  5. Card Holder

  6. Hide Label

    • This will hide the machine number on Connect and Elevate readers

2) Next for Payment Options, select the payment methods for the target location.

Reminder

Fill out the "Site data" portion before filling out the "Machine Data" information.

If you fail to set the site data, your profile will not save to your target location.

Machine Data

1)  After filling out the 'Site Data' tab with the information for your test location, select the 'Machine tab'→ 'Maytag', and enter the REC and Model you found on KPS for the machine (use the Maytag search bar in the profile builder).

2) Click on the 'Advanced Options' button to view all machine parameters: 

A screenshot of a computer AI-generated content may be incorrect.

3) Start by entering the pricing parameters.

4) Enter Special pricing if applicable to the request.

5) Enable or disable the top off feature.

Top Off

A dryer set to offer Top Off capability will allow time to be added to an existing dry cycle in increments equal to the number of minutes of dry time per quarter (coin 1), up to 99 minutes, regardless of the cost required to start the dryer. No credit is given for coins or debit inputs entered when the control is displaying 99 minutes.

The top-off time is calculated according to the following equation:

6) Fix the value of coin1. Maytag machines have the value of coin1 in nickels ($0.05) (Under the Misc. section, adjust to the correct amount).

Save Profile

1) Save your profile by selecting the drop-down option at the top left of the profile builder, and choose the 'Save Profile' option. 

A screenshot of a computer AI-generated content may be incorrect.

2) Then, enter the custom text and click on the “Save” button.

Related articles