A common small-chassis Maytag washer is the MAT20. In the Maytag model number format, the "M" stands for Maytag, and the "20" refers to the machine's clothing weight capacity, measured in pounds. It’s necessary to identify the machine details before building a profile. The MAT20 has a matching dryer, model MDx20, where 'X' denotes the type of power: 'G' for Gas or 'E' for Electric.
MAT20's display board | Maytag Model Number Decoder |
|---|---|
| |
Site Data
1) Click on “Site Data” and enter location information.
Site Code and Location ID must match the location in Location Management on Laundry Portal
For Location ID and Room#, you should enter the ones that you created previously
See image below regarding Site Data’s field values.
|
2) Next for Payment Options, select the payment methods for the target location.
Reminder
Fill out the "Site data" portion before filling out the "Machine Data" information.
If you fail to set the site data, your profile will not save to your target location.
Machine Data
1) After filling out the 'Site Data' tab with the information for your test location, select the 'Machine tab'→ 'Maytag', and enter the REC and Model you found on KPS for the machine (use the Maytag search bar in the profile builder).
2) Click on the 'Advanced Options' button to view all machine parameters:
3) Start by entering the base price on all cycles.
4) Enter Special pricing if applicable to the request, as well as Special pricing days.
5) For the Powerwash option, add another amount (normally 25 cents) and then adjust the default options.
6) Then, adjust the Powerwash default settings.
7) Set the water temperature upgrades and the modifiers/adders.
8) Fix the value of coin1. Maytag machines have the value of coin1 in nickels ($0.05) (Under the Misc. section, adjust to the correct amount).
Save Profile
1) Save your profile by selecting the drop-down option at the top left of the profile builder, and choose the 'Save Profile' option.
2) Then, enter the custom text and click on the “Save” button.
