1. Site has 51 – 140 devices
For a location that has 51 – 140 devices, we recommend using the InHand IR302 FQ38 modem, a PT-Link TL-SF1005P PoE+ switch, and two Ubiquiti U7 Pro Access Points.
InHand modem | 
PT-Link PoE+ switch | 
Ubiquiti Access Point |
1.1 Network Diagram
1.2 Enclosure Box Installation
Unpack the box. Take out the built-in power outlet and one of the vents, then put the two black outlets in.
|
| 
|
Use the gorilla double-sided tape to attach the power supply of the Edge Linux Box, power supply of the TP-Link switch box, and the power strip onto the bottom plate as shown below.
|
| 
|
Connect all the Ethernet cables, power cables and antenna to the Edge Linux Box, TP-Link switch box and the modem as shown below.
|
|
| 
|
Using the gorilla double-sided tape, place the Edge Linux Box and the TP-Link switch box on top of their power supplies.
|
|
Place the InHand modem on top of the TP-Link switch box using the gorilla double-sided tape, then mount the Wi-Fi antennas of the Edge Linux Box. Do your best for cable management.
|
|
Power cords connections | AP connections |
| 
|