InHand Modem System Enclosure Box User Manual

Prev Next

The document is intended to introduce what a user should do once receiving the InHand Modem system enclosure box kit.

Please refer to the steps below when you receive an InHand Modem system enclosure box kit.

  1. Open package and remove foam.

  1. Carefully remove the Ubiquiti access point.

    Note: If you are mounting the access point in ceiling, follow the video for guidance. (https://www.youtube.com/watch?v=v4SwAB5fhaE).

Ubiquiti Access Point

  1. Once Access point is mounted, connect the ethernet from the ceiling access point to the switch port.

  1. Next connect the Blue ethernet cable from the switch box to kiosk 1.

  1. Plug the power cord from modem into outlet A on RPCM

RPCM

  1. Plug the power cord from the switch into outlet B on RPCM.

  1. Plug RPCM into the wall outlet.

  1. Plug the power cord from Edge box Network Kit into the wall outlet.