Install

1) Press the sandwich button at the top left corner and click the first field name “Install”.

2) There are 3 items in the “Install” field, “Inject Vendor Key”, “Setup” and "CleanPay Central".

INTENTIONALLY LEFT BLANK

INTENTIONALLY LEFT BLANK

1) Click “Inject Key” in admin menu on the Kiosk.

2) Select “Key Injection with KLM” on the screen.

3) The Kiosk will display its QR code and machine number.

4) Click “Inject Vendor Key” on the interface of “Install”. Then there are two approaches to injecting the vendor key, either scanning QR Code or Entering machine number.

5) Select “Kiosk” to inject vendor key.

6) You can select to enter machine number or scan QR code to help KLM find the device.

7）The Kiosk screen will display the key injection process as is shown below.

8）After the key injection is finished, a prompt message will pop up to remind you the result of the key injection.

1）Tap the PayRange logo at the upper left corner of the tablet screen for 5 times consecutively.

2) Enter SRC and click the “Submit” button.

3) At the bottom right corner of the “Sign In” page, there will be a QR code and machine number that could be used for key injection via KLM.

Note: If there is no machine number, it means that the machine has not been set up and you need to perform profile upgrade.

If you accidentally skip the key injection and enter the admin menu, the QR code on the admin menu can be used for key injection via KLM.

4) Click “Inject Vendor Key” on the interface of “Install” on KLM app. Then there are two approaches to injecting the vendor key, either scanning QR code or entering machine number.

5) Select “Kiosk” to inject vendor key.

6) You can select to enter machine number or scan QR code to help KLM find the device.

7) The tablet will start key injection, at the same time send the key injection command and key data to VXT/ VQF.

8) The VXT/ VQF starts key injection after receiving the command.

9) After completing the key injection, the VXT/ VQF will return the key injection to the tablet.

10) The tablet will send the whole key injection result to KLM app.

9) Only when both the tablet and VXT/ VQF are successful in key injection, will the KLM display the prompt below indicating the successful key injection result.

1) Press on the tab “Setup” marked in the red box on the “Install” list.

2) Before “Setup”, make sure Internet Connection is available and confirm Location. Press on the button bordered in blue to proceed Setup with your Location.

3) The rooms belonging to your Location which has been confirmed before can be displayed on the new page. Choose the room you would like to check.  

Or: You can also click “Setup New Reader” directly.

1. If you select a room, please skip to step 4). (In this way, you will select a profile from those in the room.)

2. If you click “Setup New Reader” directly, then select the type of the Reader to be set up in the list according to your own needs. (In this way, you will select a profile from those in the location. And please ensure Internet Connection is available, as we need to get the profile from server.)

   Then select the profile for the Reader you want to set up from Server. You can input the keywords of the Profile in the search box for quick searching. If you have set up a reader using a profile in the list before, then you can also get the profile from Device.

   After selecting a profile, please skip to step 9).

4) After selecting a room, the information of the machines in the target room can appear on the screen. Also, the other three functions can be achieved by clicking the corresponding blue buttons at the bottom. (As follows)

5) Click the second blue button “Installation Video(s)”.

(If the video is unnecessary for you, please skip to  step 7) directly.)

6) Choose the type of the Reader to be set up and refer to the corresponding video(s).

7) Click the first blue button “Setup New Reader” on the initial page of the chosen room. Then select the type of the Reader to be set up in the list according to your own needs.

8) If selecting “Other Reader Series”,  please choose a Profile for the Reader you want to set up. You can input the keywords of the Profile in the search box for quick searching.

If selecting “Ultra Series”, after choosing a Profile for the Reader you want to set up, you also need to choose Ultra Data as needed. You can input the keywords of the Profile in the search box for quick searching.

If selecting “eDrop Series”, after choosing a Profile for the Reader you want to set up, you also need to choose an eDrop Series Profile as needed. You can input the keywords of the Profile in the search box for quick searching.

9) Enter Machine Number and scan Machine ID, after which press the green button “NEXT” at the bottom.

10) Scan QR Code or enter machine number by pressing on corresponding tabs to complete setup for the target machine.

11) When finishing the setup, press on the back icon “＜” and click the green button “Finish Setup and Upload Data to Server”.  

(If you didn’t select a room in step 3), please skip to the next step.)

12) A prompt “Data Uploaded to Server Successfully” will pop up and click “OK” in blue to finish the process.

1) Click the “CleanPay Central” button on the “Install” menu.

2) There are two parts to this section. You need to sync WiFi first before adding the reader. Click “Sync WiFi”.

3) You need to login on CP Central Kiosk Setting>Reader Management>Add Reader and scan the QR Code on Kiosk to synchronize WiFi.