1) Identify the location. | 2) Remove the cover plate. | 3) Prepare the mounting plate. Note: The mounting plate is in the took kit coming with the machine. |
|
|
|
4. Attach the mounting plate on bill acceptor as shown. | 5) Fasten the plate using screws. | 6) Remove the nuts remained on the machine. |
|
|
|
7) Insert the mounting plate into the opening space. | 8) Fasten the four screws at both sides. | 9) Connect the MDB cable to the machine. |
|
|
|
Install Bill Acceptor
- Updated on Oct 9, 2026
- Published on Sep 24, 2026
- 1 minute(s) read
Was this article helpful?








