1) Find the installation position. | 2) Remove the cover plate. | 3) Prepare the mounting plate. Note: The mounting plate is in the took kit coming with the machine. | |
|
|
| |
4) Install the mounting plate with M4*12 nuts. | 5) Insert the reader into the opening from outside. | 6) Fasten the four screws to secure the installation. | |
|
|
| |
7) Plug one male end of the MDB cable to the reader and another end to the machine. | |||
| |||
Install Reader
- Updated on Oct 9, 2026
- Published on Sep 24, 2026
- 1 minute(s) read
Was this article helpful?






