Mode: Cooling/Heat/Off. For TF45E2, you should select Cooling mode.
Target: The target temperature set for machine cabinet inside, lowest temperature can reach -20°C (- 4°F) in this model, recommend to set as -18°C or adjust based on actual situation.
Temp. Tolerance: The deviation ranges from the target temperature that triggers temperature control actions.
For example, Target: 30℃ | Temp. Tolerance: 5
▸ Cooling activates at 35℃ (target temperature + tolerance)
▸ Cooling deactivates at 25℃ (target temperature - tolerance)
▸ Cooling deactivates at 25℃ (target temperature - tolerance)
Defrost Period: the time interval for defrost cycles. It is recommended to keep the default setting.
Defrost Duration: the continuous time period to complete a defrost operation. It is recommended to keep the default setting.
Defog: to turn on/off the glass defogging (glass heating). The default setting is on.
Note: This is a feature reserved for other frozen machine with a glass door, please keep the default setting.
Temp. Controller Mode: to select mode for temperature controlling.
▸ Dual Mode: to set temperature on machine. When it is enabled, you can set the parameters of temperature controller on machine.
▸ Android Mode: to set temperature through Android machine.
▸ Offline Mode: to set temperature on the temperature controller only.
Restore Default Setting: to reset to factory defaults (use with caution: may erase custom settings).
Advanced Menu: press “Enter” button to enter advanced menu. The password is “ ”.
Safety Operation Caution
Sequence when turning on the machine: power on, turn on the temperature controller switch.
When turning off, turn off the power.
There should be an interval of 60 seconds when restarting the machine.
When the refrigerator door latches are released and the door is open, the evaporator fan will shut off. However, the fan will forcibly start after a 10 minutes delay even if the door remains open. This is to mitigate the risk of fan not working due to door switch failures.