VQ-M Air Bracket Secondary Installation Guide

  • Updated on Sep 15, 2025
  • Published on Sep 15, 2025
  • 1 minute(s) read
Prev Next

  1. Remove the four screws from the Metal Case Cover, then remove the Face Plate from the Metal Case.

  1. Mount the VQ-M reader on the Metal Case Cover and fix them with four M4×10 screws.

  1. Cable Connection

Cables

Part Number

Part Name

WH910006

VQM to EEM Cable

WH910007

EEM Connection Cable

PP000303

Antenna Extension Cable

Steps

Insert VQM to EEM Cable and Antenna Extension Cable as shown in the picture.

Please pay attention to the connector of Antenna connected to VQM.

Let the two cables go through the small hole on the Metal Case Cover.

Connect the VQM to EEM Cable and the EEM Connection Cable

  1. Put the Metal Case Cover onto the Air Bracket Metal Case.

  1. Seal with Glue

Steps

Fix the Metal Case Cover on the Metal Case with four M5×10 screws

Use the green glue to fix the four screws.

Use the red glue to cover the hole and fix the two cables.

Related articles